Model No: CL-PAS2-200-4.6
Input voltage: 90-264VAC
Output power: 4.6V 40A
Input Parameters:
Input Frequency Range: 47～63HZ(Typ 50/60)
Max AC Current: <2.5A, 100Vac, full load
Inrush current: ≤90A, 240V, Full load, 25℃
PF >0.95(AC100~240Vac, full load)
Leakage Current:I/P-O/P:≤0.25mA, I/P-F/G:≤3.5mA (Vin=250Vac 60HZ)
Standby watt<5W

Output Parameters:
Dc Voltage Range: 4.6V
Output voltage adjustment range: DC 4.5～4.7V
Output Current: : 90-175Vac, 20A( NO Auxiliary heat sink), 176-264Vac, 30A( NO Auxiliary heat sink), 90V-175Vac, 30A( installed an Auxiliary heat sink at the bottom of power supply, 300*200*3mm AL panel), 176-264Vac, 40A(installed an Auxiliary heat sink at the bottom of power supply, 300*200*3mm AL panel)
Max power:184W
Ripple & Noise: ≤150mVp-P（@220Vac, rated load,25℃）
Efficiency (Typ): ≥88%（Typ 90.5%) input Voltage: 230Vac, Rated load,25℃; ≥86%（Typ 88.5%,input voltage: 115Vac, Rated load,25℃
Output Risetime<50mS
Power on delay time<3S
Voltage Tolerance:±2%
Line Regulation: ±1%
Load Regulation:±2%

Protection:
Over voltage protection: 5-5.5V
Over current protection: 50-70A
Over temperature protection: 65-85℃, full load 25℃.
Short circuit protection,Hiccup mode, recovers automatically after fault condition is removed

Safety Standards:
UL60950, IEC/EN60950, GB4943.1-2011
EMC: FCC Part 15 B,EN55022(CISSPR22)ClassB,EN61000-3-2,EN61000-3-2
EMI: EN61000-4-2,3,4,5,6,8,11,Surge Vcom: ±2kV VDiff: ±4kV
Hi-pot: I/P-O/P: 3.0KVAC/ 10mA/ 60S , I/P-FG:1.5KVAC/ 10mA/ 60S , O/P-F/G: 500Vdc/10mA/ 60S
Isolation Resistance:I/P-O/P:≥10MΩ@ 500Vdc,I/P-F/G:≥10MΩ@ 500Vdc,O/P-F/G:≥10MΩ@ 500Vdc
Leakage current: I/P-FG: ≤3.5mA , I/P-O/P:≤0.25mA (240Vac/60Hz)

Others:
Working Temperature:‘-20℃ ～ +70℃
Working Humidity:5%～90%RH
Storage temperature: -40℃～+80℃
Free air convection
Dimension (L*W*H): 210*30*25mm
Carton Dimensions: 40*31*18.5 cm
Packing: 0.3KG/16.5KG/0.04CBM/CTN
MTBF:100K hours (MIL-HDBK-217F (25℃ )

Products Parameters:
Model No, Drive Mode, Output Voltage, Output Current, Ripple&Noise, Full Load, Efficiency/230V
CL-PAS2-200-5 CV 5V±2% 0-40A ≤300mV 88.0%
CL-PAS2-200-4.6 CV 4.6V±2% 0-40A ≤300mV 88.0%
CL-PAS2-200-4.2 CV 4.2V±2% 0-40A ≤300mV 87.0%