Zdec S82S1018 RGB LED wall receiving card V82RV08 geared with HUB75 board has the following features:

1. Supports full color real display
2. Supports 16 or 24 pairs output parallel datum
3. Supports 16 pairs output serial datum
4. Supports 12 Hub75 interfaces, without HUB card
5. Supports gigabit communications transmission
6. Supports 74HC138 or 74HC595 decode, and support ghost-canceling output signal
7. Supports interface for indicator lights
8. Supports 1 to 32 arbitrary scan
9. Supports 8 bit brightness correction and 16 bit color correction
10. Supports cabinet detection

Zdec ZQ-V8-RV01 (S81S1001) RGB LED screen receiving card has been out of production. We will ship ZDEC S82S1001 if you order it, which is fully compatitle. V8 system can support a variety of common universal constant current driver chip (pure Drive) such as MBI5024,MBI5026,SM16125,ZQ9726X, etc.

Zdec ZQ-V8-TS01 full color LED display sending card can provide an open, comprehensive LED display system platform. V8 control system for the application of common screen market, which consists of powerful software products and the control system hardware products. ZQ-V8 most important feature is that customers are now mass-produced products do not make any changes and adjustments under the premise and greatly improved product performance, and thus, to enhance product performance and cost advantages. Zdec ZQ-V8-TS01 has been out of production. We will ship ZDEC M81GCA01 (fully compatible) if you order it.

Zdec ZQ-V8-TS01 Features:
1. High scanning frequency: 8 times more compared to other systems;
2. Refresh rate up to 4000Hz using ZDEC driver IC;
3. Supports timing adjustment;
4. Loading: input and output resolution can support 1920 x 1080 pixels maximum ;

Colorlight iT7 full color LED video screen sending card created on the baisis of T7, is a pioneer in integrating the dual-USB interfaces to realize high-speed communication with PC and easy cascading between sender cards. It supports wide working voltage with DC3.8-12V and has good stability and compatibility with all Colorlight’s control cards.

Colorlight iT7 Features:

-- Supports HDMI/DVI signal input;
- Supports audio input;
- Maximum input resolution with 2048*1365 pixels;
- Maximum load capacity:1310720 pixels @2048*1365;
- 2 gigabit Ethernet outputs, support arbitrary splicing;
- Dual USB2.0 for high speed configuration and easy cascading;
- Supports systematic time encryption;
- Wide working voltage with DC3.8-12V;
- Advanced design, good quality components, strict aging test, zero-malfunction of final products;
- Supports standard transmission equipment like gigabit fiber optical transceiver, gigabit switcher for further transmission distance;
- Compatible with i5A and 5A series receiver card;
- Internal testing program, support offline testing;
- Supports brightness adjustment.

As a new generation, Colorlight S2 RGB LED display sending card has been updated for its core chips, and the performance is significantly improved. It adopts dual USB2.0 interface to achieve high speed communication between the PC and sending card. S2 can realize cascading between multiple cards, which is much more convenient. Moreover, it equips PCI-E 1X interface, which is more versatile.

Colorlight S2 Features:

• Support DVI signal input
• Support audio input, synchronous transmission through the network cable
• Maximum input resolution: 1920*1200 pixels.
• Loading capacity: 1.31 million pixels. Max in Width: 2560 pixels, Max in Height: 2560 pixels.
• 2 Gigabit Ethernet port outputs support screen arbitrary splicing
• Dual USB ports for high speed configuration and easy cascading
• Improved grayscale performance at low brightness
• Equip with 1X PCI-E interface, more versatile
• Wide working voltage with DC 3.8~12V
• Compatible with all series of Colorlight receiving cards

Mooncell VCSG3-V52A LED Panel Receiving Card Features:

1. 60 ways of outputs in serial with one card, which can be extended to 120 ways.
2. The maximum output of the RGB are 21 sets
3. The maximum pixel that one could load is 64K, each set of the data could load 8k pixel.
4. Input voltage: 3.5V--6V
5. High Refresh rate, high brightness and high gray grade with common IC (Driver).
6. Dual backup for the network Cable
7. To get the single pixel calibration without decreasing the pixel load area
8. Variety of Drivers are supported. It supports PWM IC, Point by point Detecting IC and Conventional IC.
9. It supports to save the settings beforehand.
10. It supports to monitor all the parameters of the receiving card.
11. It supports to monitor the environment.
12. Intelligent recovery function, swapping the receiving cards without the need of loading all the data again.
13. Companied with Mooncell Intelligent Power Supply ( two power supplies as in parallel, equalized current, short-circuit protection) you will never ever get black screen.
14. It confirms to RoHs and CE-EMC standards.

Mooncell M-RA50 LED Wall Thin Receiver Card Features:

1. RGB Outputs: 28/24 Sets.
2. The maximum pixel that one card could load is 96K, each set of the data could load 8k pixel.
3. Input voltage: 3.5V--6V
4. High Refresh rate, high brightness and high gray grade with common IC (Driver).
5. Dual backup for the network Cable
6. To get the single pixel calibration without decreasing the pixel load area
7. Varieties of Drivers are supported. It supports PWM IC, Point by point Detecting IC and Conventional IC.
8. It supports to save the settings beforehand.
9. It supports to monitor all the parameters of the receiving card.
10. It supports to monitor the environment.
11. Intelligent recovery function, swapping the receiving cards without the need of loading all the data again.
12. Companied with Mooncell Intelligent Power Supply you will never ever get the black screen.
13. It conforms to RoHs and CE-EMC standards.

Mooncell VCSG3-V51 LED Board Receiving Card Features:

1. 60 ways of outputs in serial with one card, which can be extended to 120 ways.
2. The maximum output of the RGB are 21 sets
3. The maximum pixel that one could load is 64K, each set of the data could load 8k pixel.
4. Input voltage: 3.5V--6V
5. High Refresh rate, high brightness and high gray grade with common IC (Driver).
6. Dual backup for the network Cable
7. To get the single pixel calibration without decreasing the pixel load area
8. Variety of Drivers are supported. It supports PWM IC, Point by point Detecting IC and Conventional IC.
9. It supports to save the settings beforehand.
10. It supports to monitor all the parameters of the receiving card.
11. It supports to monitor the environment.
12. Intelligent recovery function, swapping the receiving cards without the need of loading all the data again.
13. Companied with Mooncell Intelligent Power Supply ( two power supplies as in parallel, equalized current, short-circuit protection) you will never ever get black screen.
14. It confirms to RoHs and CE-EMC standards.

Mooncell VCMA10-V11 Big LED Wall Sending Card Features:

1. It comes with 2 ways of DVI Inputs, the spare one will be used as the backup.
2. 4 Network Ports for Outputs.
3. With USB Interface, Multiple Sending Cards Could be Connected to the same computer(Cascading)
4. Supporting Multiple Resolutions: 1024X768、1280X800、1366X768、1600X1200、1920X1080、2048X1152、2560X960，and it can read-back (detect) the computer’s screen resolution.
5. The Number of Pixels it could upload: One Card can load up to 2.6 million Pixels and One Single Network Interface can load up to 650 thousand Pixels and the Image Window is movable.
6. 2 Ways to take the power (get your cards powered on (electricity)).
7. It supports “Color Space Conversion”.

Mooncell VCMA7-V30 is a Synchronized full color LED display sending card that specially designed by Mooncell with the following features:

1. It comes with One DVI Input.
2. Dual Network Interface
3. With USB Interface, Multiple Sending Cards Could be Connected to the same computer(Cascading)
4. Supporting Multiple Resolutions: 640X480、800X600、1024X768、1280X1024、1280X720、1280X800、1366X768、1600X1200、1920X1080、2048X1152、2560X960，and it can read-back (detect) the computer’s screen resolution.
5. The Number of Pixels it could upload: One Single Card can load 1300 thousand Pixel and One Single Network Interface can load 650 thousand Pixel and the Image Window is movable.
6. 3 Ways to take the power (get your cards powered on (electricity)).
7. It supports “Color Space Conversion”.

Mooncell M-RA70 LED Panel Mini Receiver Card Features:

1. With 32 groups of RGB output.
2. A single card with a maximum load of 96K pixels, each data can carry 8K pixels.
3. Wide voltage input, input voltage range is +3.5 V --- +5.5 V.
4. Conventional chip high refresh, high brightness, high gray.
5. Support receiving card parameters back to read.
6. With cable double backup function, support cable detection;
7. Support cabinet temperature, humidity, power supply voltage monitoring, fan control;
8. Support brightness, color point-by-point correction. And does not reduce the receiving area of ​​the receiving card.
9. Support a wide range of driver chips. Support PWM chip, point by point detection chip, conventional chip.
10. Support receiving card pre-screen settings.
11. Support all receiving card parameter monitoring function.
12. Support external environment monitoring function.
13. Intelligent recovery function. There is no need to reload the program after replacing the card.
14. Never black screen. And intelligent power supply, in the event of a power failure, reduce the display brightness.
15. Each interface provides power pins to support the cell board to take power.
16. Meet the EU RoHs standards.
17. Meet the EU CE-EMC standards.

Mooncell M-TA20 LED synchronous sending card is compatible with VCMA7-V10-out of production. Mooncell M-TA20 has the following features:

1. Two DVI input ports, one for DVI signal main port, the another for backup.
2. Four output ports.
3. Two USB ports, one connects to PC, the other can be cascaded to the same type of receiving card, or other USB devices.
4. Support multi resolution： 1024×768,1280×720,1280×800,1366×768,1600×1200,1920×1080,2048×1152,2560×960 and other frequently used resolutions, as well as resolution back read.
5 .One single Sending card can load 2,350,000 pixels, and one single port can load 650,000 pixels. The graphic position can be setup arbitrarily.
6. Two ways for getting power.
7. It support Chroma restore.

Novastar MSD300 sending card is one ne of the most popular sending cards for RGB LED display wall applications especially for staging and rentals thanks to its ultimately stable performance and user friendly operation with its control software. The NOVA MSD300 sender can be fixed properly into video processor such as RGBLINK, VDWALL, Magnimage, Createk, etc. The basic details of it are as follows:

1. 1 DVI interface for video input.
2. USB interface for instruction communication.
3. Audio input interface integrated.
4. Resolutions supported: 1024×1200, 1280×1024, 1600×848, 1920×712, 2048×640.

NOVA MSD300 Features:

1. New architecture enabling better performance, better reliability and easier integration;
2. 16 bits bright/chroma calibration for Arc shape and irregular shape LED display;
3. Comprehensive intelligent LED display status monitoring;
4. Low voltage power supply (3.3V);
5. Supporting almost all conventional resolutions and LED light driver chips.

Novastar MSD600 high resolution LED sending card is another revolution for LED display sending card. NOVA MSD600 is geared with HDMI input and can support larger resolution compared with basic sending card MSD300. Kindly note that due to its bigger size, this NOVA MSD600 sender can only install one piece into video processor such as VDWall, RGBLink, Magnimage, KyStar, etc.

Novastar MSD600 Features:

1） HDMI/DVI input;
2） HDMI/extermal audio input;
3） 12bit/10bit/8bit HD video source;
4） Resolution supported:2048×1152，1920×1200，2560×960;
5） Resolution supported:1440×900; (12bit/10bit)
6） 1 light sensor interface;
7） Cascading supported;
8） 18bit gray scale processing and presentation;
9） Video format:RGB,YCrCb4:2:2,YCrCb4:4:4;

Linsn RV902H (RV952H) LED board Mini recieving card is upgraded from the 8th generation system RV802/RV806. RV902H is specifically designed for led lighting decoration and led curtain, which require small size for easy installation. Compared with RV901H, RV902H is of small size and with different output interfaces. RV902H has all other functions of RV802/806, Besides, RV902H is added with the following features:

1. Support 12-bit HDMI colors input (required the 9th generation sending card)
2. Single card maximum supports 1024X256 pixels, and 1024 grades single pixel chromaticity correction
3. Using18-bit signal processor, maximum support 18-bit (260,000) gray (each of red, green and blue)
4. Supports single-card color space conversion
5. Supports hot backup with dual receiver cards for demanding performances screen
6. Support program replication
7. Support configuration file readback
8. Supports pixel fault detection (requires a dedicated chip support)
9. Support network cable BER test
10. Support flat cable fault detection
11. Temperature monitoring
12. Support the cabinet-door monitoring (open/close)
13. Humidity monitoring (humidity sensor sold separately)
14. Three lines Voltage monitoring: one for the system, two for cabinet power
15. Two lines fan-speed monitoring
16. Smoke monitoring (smoke module sold separately)
17. In line with EU standards CE-EMC

Linsn RV901T RGB LED display board receiving card can work with all its old receiving cards such as LXY801/RV801/RV801D/RV801-D/RV801F/RV901/RV901H (for RV801 series, it is 100% compatible, please just try it). The difference between RV901H and RV901T is that RV90T is without LCD, smoke, humidity, door and fan detecting interfaces.

LINSN RV901T Features:

1. Supports 12-bit color HDMI input (on behalf of the sending card with nine);

2. With 18 signal processors, up to 18 each of red, green and blue (260 000) gray;

3. Single card maximum supports 1024 X 256 pixels;

4. CE-EMC compliance with EU standards.

Equipped with HUB75 ports, Linsn RV908T full color receiver card is primarily designed for LED video wall manufacturers with standardizing products, which can save some costs on the HUB boards. RV908T has the same size and function of RV801 series besides its new characteristics. The difference between RV908T and RV908H is that RV908T is without LCD, smoke, humidity, door and fan detecting interfaces.

Linsn RV908T Features:

1. Geared with 12 HUB75 of 16P interfaces on board, no need for extra HUB card;

2. Supports 12-bit color HDMI input ( TS901 sending card required );

3. With 18 signal processors, up to 18 each of red, green and blue (260 000) gray;

4. Single card can maximum-support 1024X256 pixels;

5. CE-EMC compliance with EU standards.

Linsn EX901(EX901D) LED screen multi-function control card is geared with temperature and humidity acquisition, switching power of the big-screen and voice transmission capabilities. It can regulate the adjustment of brightness.

Linsn EX901 Features:

1. Integrated audio signal transmission, no external audio amplifier line, direct access function card;

2. 256 grade automatic brightness adjustment;

3. Monitoring the led screen's temperature and humidity in Real-time;

4. Displaying the current temperature and humidity on the led screen;

5. Smoke detection,(need to install the smoke probe);

6. Power On/Off the power of the led screen remotely;

7. Controlling the led screen's fan and air-conditioning switcher automatically through the temperature.

Linsn RV908M receiving card is RV801 or RV901 plus HUB75 board, It is designed for HD LED video wall modules with 1/32 scan. It is a perfect choice for manufacturers with standardization---free of hub card design. It has all the function of RV801 and RV901. RV908M has added with the following features:

1. Onboard the 12 16-Pin interface of HUB75 the, no extra hub needed;
2. Single card maximum supports 1024X256 pixels, and 1024 grades single pixel chromaticity correction;
3. Support program replication;
4. Using18-bit signal processor, maximum support 18-bit (260,000) gray (each of red, green and blue);
5. Support the cabinet-door monitoring (open/close);
6. Support 12-bit HDMI colors input (required the 9th generation sending card);
7. Three lines Voltage monitoring: one for the system, two for cabinet power;
8. Supports pixel fault detection (requires a dedicated chip support);
9. Support flat cable fault detection;
10. Two lines fan-speed monitoring;
11. Supports hot backup with dual receiver cards for demanding performances screen;
12. Support network cable BER test;
13. Supports single-card color space conversion;
14. Smoke monitoring (smoke module sold separately), Temperature monitoring, Humidity monitoring (humidity sensor sold separately);
15. Pass EU standards: CE-EMC.

Linsn small size receiving cards RV907H,927H,937H are specifically designed for rental LED Wall. These cards are not only compatible with generation RV807,817,827,837 completely, but can also meet the needs of LED lighting and LED curtain. RV907H,927H and 937H have the following features:

1. Compatible with RV801, has all the features of RV801
2. Small size (479mm X 1365mm), mounting holes are same with RV802
3. Four output interfaces can directly drive module (save hub card)
4. Each of the 4 interfaces has up to 6 groups parallel-data; total 24 groups of parallel data interface to achieve higher refresh rate
5. Provide a 90 degree 26-Pin interface, convenient PCB docking design
6. Provide 16 groups serial-data for led lighting and led curtain
7. Each interface has VCC pin to get power supply for control system from led module. No need to get extra power supply for control system.
8. support 12-bit HDMI colors input (required the 9th generation sending card)
9. using18-bit signal processor, maximum support 18-bit (260,000) gray (each of red, green and blue)
10. Single card maximum supports 1024X256 pixels, and 1024 grades single pixel chromaticity correction
11. Supports single-card color space conversion
12. Support program replication
13. Supports pixel fault detection (requires a dedicated chip support)
14. Support network cable BER test
15. Support flat cable fault detection
16. Support the cabinet-door monitoring (open/close)
17. Two lines fan-speed monitoring
18. Three lines Voltage monitoring: one for the system, two for cabinet power
19. Temperature monitoring
20. Humidity monitoring (humidity sensor sold separately)
21. Smoke monitoring (smoke module sold separately)
22. In line with EU standards CE-EMC

Linsn EX902D LED wall multifunction controller is used together with sending card and receiving cards with followings functions:

1. Integrated audio signal transmission, no need additional audio cable, can directly access the functional card toamplifier;
2. 256 automatic brightness adjustment;
3. Real-time monitoring screen in temperature and humidity;
4. Display the current temperature, humidity in LED screens;
5. Smoke detection when install smoke probe;
6. Remote Switch big screen power;
7. Automatic sensor temperature and self-control fan and air-conditioning switch.

VDWall LVP615S wireless LED video screen processor is gettting sold very well on the world market due to the following features:

1. The latest generation Faroudja Real Color true color image processing, 10 + Bit Faroudja DCDI deinterlacing video processing, Faroudja TureLife (tm) video enhancement;
2. Seamless transitions, fade switch, switch integration;
3. Two kinds of source switching methods: a key switch and switching preselection + Take;
4. Three custom dual-screen mode, a key switch between modes, any picture in picture (PIP / PBP) display, AIAO (Any In Any Out) function, any interception of any output;
5. The same set of input signals hot backup function to ensure a more stable and reliable output;
6. Custom input DVI EDID, perfect realization point display;
7. Custom output resolution up to 3840 single horizontal pixels, vertical pixels up to 1920;
8. DVI Loop support for Apple PC, DVI Loop splicing infinite cascade synchronous drive unlimited LED dot matrix screen. Frame synchronization between the output image dislocation and delay;
9. A variety of control methods: Wireless wifi, IP / LAN, panel buttons, infrared remote control, PC software, flexible and easy to operate;
10. 2 roads can configure an external stereo audio, plus a total of four HDMI and SDI audio channel audio Salvo;
11. Can be built two LED sending card (compatible kcal);
12. 24/7 applications, high reliability, stability;

Main Specifications:

Input: 2*Video / 1*Ypbpr / 2*VGA / 1*DP / 1*HDMI / 1*SDI

Output: 1*VGA / 2*DVI (1024*768_60HZ/75HZ / 1080*1920_60HZ / 1200*1600_60HZ / 2560*816_60HZ)

Size: 483*274*66.6mm

G-energy JPS200P LED Panel Power Supply 5V 40A 200W Specifications:

- Ultra-thin: 30mm

- Working temperature:-30C~+60C

- Storage temperature: -40C~+80C

- Ultra-light and easy to install

- High efficiency: >90%

- Output voltage range: 4.9~5.1V

- Compliance: CE, CCC,UL

- Input Voltage: 110~240VAC/automatic

- Output: 5V 40A-200W

- Size: 208*60*30mm

Dbstar DBS-ASY11C asynchronous system LED card is the upgraded product of DBS-ASY09 series.It has the features as follows:

1. Driver pixel screen: double color: 800×600, full color: 640×480.

2. Multi windows /multi video/OSD/PIP/transparant playing.

3. Board holding storage NAND_FLASH support 4GTF card/U box.

4. Advanced text edit function,multi language Unicode TrueType font display,images,multimedia and so on.

5. Online streaming media play, adopt MediaEncoder to realise realtime monitor video select,and remote video synchronous playing function.

6. Supports connecting brightness and temperature sensor.

Specifications:

Working Voltage: 4.7V～5.2V Working Current: 300mA

Working environment: -15℃～60℃ Size: 145mm(length) x 92mm(width)

Dbstar DBS-HRV12MN LED panel receiver card has the following features:

1. Compatible with HRV09MN
2. Special design to allow the LED Screen to pass EMC test easily
3. Support program backup,temperature monitoring
4. Support on-borad fan swtich, some output ports signals can be adjusted
5. Support program custom and modifications
6. Working voltage range:2.5 ~ 12V DC.

Dbstar HRV12S RGB LED board recieving card has the following features:

1. Adopts the V-PWM3 proprietary technique

2. Supports led drivers with PWM ,highly improved refresh rate

3. Brand-new grey engine,better performance on low grey level

4. Supports PC 1000M network card sending, no need sending card

5. Supports playof 16bit HD video source

6. Supports split connection, fully use 16groups data outputs ,raise refresh rate

7. Supports grey disappearation ,easy to make the shadow disppear from the dynamic screens

8. Supports brightness calibration(16bit),chromatic caliberation.

9. Power-on gradual protection .OE polarity switch control to protect screen scan tubes

10. Working voltage range:2.5-12V DC

Dbstar DBS-HRV13A digital LED board receiving card has the following features:

Supports 256 *128 pixels 16 brightness correction;

Fast loading for correction parameter, saving display's starting time;

Supports program copying between the same type of receiving cards;

Supports three kinds of buttons / signal indicator sockets (3Pin / 5Pin / 6Pin).

Dbstar DBS-HRV11E LED screen receiving card has the most functions of RV11S/HRV09S/HRV11A and also has the special features as below:

1. Adopt deletromagnetic compatibilit technique to allow the LEDscreen to pass EMC test easily

2. Support more led drivers

3. Support more functional development and expand

4. Adopt the V-PWM3 proprietary technique

5. Controller voltage,cable error rate and module temperature monitor

6. Receiving card with relay realise fan control and so on

Dbstar DBS-HVT11IN sending card is widely used for RGB LED sign board thanks to the following features.

1. Supports RGB,the maxinmum number or color supported is one billion;
2. Supports sound transmission;
3. Supports hot backup of dual LAN lines;
4. Supports input of DVI digital signal;
5. Supports HDMI 1.3B standard ,support AADCP1.2 protocal;
6. Rotation angles 0 .90. 180. 270;
7. Supports encryption time by software setting;
8. Supports dual ports lateral ,blank line and insert line setup;
9. Working voltage range: 100-240V AC 50/60HZ;
10. USB port communication single card can drive 1280*1024 ,1024*1200,2048*640;
11. Supports OE and PWM brightness adjustment ,turn on/off an lock screen through the panel key.

Dbstar DBS-HVT11OUT LED display sender box is specially designed for easy connection with PC or video processor, which is a perfect choice for mobile/portable purpose in your LED display solution. The sending box is equipped with the DBS-HVT11 sending card inside.

Dbstar DBS-HVT11OUT Features:

1. Supports RGB ,the maxinmum number or color supported is one billion

2. Supports sound transmission

3. Supports hot backup of dual LAN lines

4. Supports input of DVI digital signal

5. Supports HDMI 1.3B standard ,support AADCP1.2 protocal

6. Rotation angles 0 .90. 180. 270

7. Supports encryption time by software setting

8. Supports dual ports lateral ,blank line and insert line setup

9. Working voltage range: 100-240V AC 50/60HZ

10. USB port communication single card can drive 1280*1024, 1024*1200, 2048*640

11. Supports OE and PWM brightness adjustment ,turn on/off an lock screen through the panel key

Kystar KS600 is a very cost effective LED display video processor. KS600 can install 2 popular sending cards. The best price above does not include the sender cards.

Kystar KS600 Features:

- HD multi-format signal input;
- Fade in/fade out switch between arbitrary signals;
- 1920*1080HD output;
- 2PCS of LED sending cards built-in ability;
- Software control;
- Offline scheduled task.

Specifications:

Input:

DV1 x 1

HDMI x 1

VGA x 1

CVBS x 2

USB x 1

Output:

DVI x 2

Control Interface:

USB x 1

RS232 x 1

Others:

Input Voltage: 110-240VAC

Net Weight: 3.5KG

Size: 66(H)×432(L)×225(W)

Mooncell VCSG3-V23C LED HUB75 Receiving Card Features:

1. It conventionally has 16 sets of RGB Output, and features 8 hub75 interfaces.
2. The maximum pixel that one card could load is 64K, each set of the data could load 8k pixel.
3. Input voltage: 3.5V--6V
4. High Refresh rate, high brightness and high gray grade with common IC (Driver).
5. Dual backup for the network Cable
6. To get the single pixel calibration without decreasing the pixel load area
7. Variety of Drivers are supported. It supports PWM IC, Point by point Detecting IC and Conventional IC.
8. It supports to save the settings beforehand.
9. It supports to monitor all the parameters of the receiving card.
10. It supports to monitor the environment.
11. Intelligent recovery function, swapping the receiving cards without the need of loading all the data again.
12. Companied with Mooncell Intelligent Power Supply you will never ever get the black screen.
13. It conforms to RoHs and CE-EMC standards.

Mooncell VCSG3-V22D LED Screen Receiving Card Features:

1. It conventionally has 16 sets of RGB Output, which can be extended to 32 Sets.
2. The maximum output of the RGB is 21 sets
3. One single card Connection in series can get 64sets of RGB output, which can be extended to 128
4. The maximum pixel that one can could load is 64K, each set of the data could load 8k pixel.
5. Input voltage: 3.5V--6V
6. High Refresh rate, high brightness and high gray grade with common IC(Driver).
7. Dual backup for the network Cable
8. To get the single pixel calibration without decreasing the pixel load area
9. Variety of Drivers are supported. It supports PWM IC, Point by point Detecting IC and Conventional IC.
10. It supports to save the settings before hand.
11. It supports to monitor all the parameters of the receiving card.
12. It supports to monitor the environment.
13. Intelligent recovery function, swapping the receiving cards without the need of loading all the data again.
14. Companied with Mooncell Intelligent Power Supply( two power supplies as in parallel, equalized current, short-circuit protection) you will never ever get black screen.

Mooncell VCSG3-V23D-A LED Sign Receiving Card Features:

1. It conventionally has 16 sets of RGB Output, which can be extended to 32 Sets.
2. The maximum output of the RGB is 21 sets
3. One single card Connection in series can get 64sets of RGB output, which can be extended to 128
4. The maximum pixel that one can could load is 64K, each set of the data could load 8k pixel.
5. Input voltage: 3.5V--6V
6. High Refresh rate, high brightness and high gray grade with common IC (Driver).
7. Dual backup for the network Cable
8. To get the single pixel calibration without decreasing the pixel load area
9. Variety of Drivers are supported. It supports PWM IC, Point by point Detecting IC and Conventional IC.
10. It supports to save the settings beforehand.
11. It supports to monitor all the parameters of the receiving card.
12. It supports to monitor the environment.
13. Intelligent recovery function, swapping the receiving cards without the need of loading all the data again.
14. Companied with Mooncell Intelligent Power Supply (two power supplies as in parallel connection, Sharing current, short-circuit protection) you will never ever get black screen.
15. It conforms to the RoHs and CE-EMC Standards.

Mooncell EM10 LED Multifunction Control Card Details:

Product Type: Control Card for Temperature,Humidity and Lightness
Product Model: Mooncell EM10
Input Voltage: +3.5V---6V
Output Power: 7.5W
Product Dimensions: 144mm X 92mm
Supported Display Modules: Single Color, Dual Color, Full Color

Monncell PC10 LED Power Supply Control Card Details:

Product Type: Power Supply Control Card
Product Model: Mooncell PC10
Input Voltage : +3.5V---6V
Output Power: 7.5W
Product Dimensions: 144mm X 92mm
Supported Display Module: Single Color, Dual Color, Full Color

MoonCell M-RA30 LED Wall EMC Receiving Card Features：

1. Conventional RGB output with 24 groups, with 12 HUB75 interface.
2. A single card with a maximum load of 96K pixels, each data can carry 8K pixels.
3. Wide voltage input, the input voltage range of +3.5 V --- +6 V.
4. Conventional chip high refresh, high brightness, high gray.
5. Double backup with network cable.
6. Support brightness and chroma point-by-point correction. And does not reduce the receiving area of the receiving card.
7. Support a wide range of driver chips. Support PWM chip, point by point detection chip, conventional chip.
8. Support receiving card pre-screen settings.
9. Support all receiving card parameter monitoring function.
10. Support external environment monitoring function.
11. Intelligent recovery function. There is no need to reload the program after replacing the receiving card.
12. Never black screen. And intelligent power supply, in the event of a power failure, reduce the display brightness.
13. In line with EU RoHs standards.
14. Conforms to European CE-EMC standard.

Mooncell M-RC32A RGB LED EMC Receiver Card Features:

1. Conventional RGB output with 24 groups, with 12 HUB75E interface.
2. A single card with a maximum load of 96K pixels, each data can carry 8K pixels.
3. Wide voltage input, the input voltage range of +3.5 V --- +6 V.
4. Conventional chip high refresh, high brightness, high gray.
5. Double backup with network cable.
6. Support brightness and chroma point-by-point correction. And does not reduce the receiving area of the receiving card.
7. Support a wide range of driver chips. Support PWM chip, point by point detection chip, conventional chip.
8. Support receiving card pre-screen settings.
9. Support all receiving card parameter monitoring function.
10. Support external environment monitoring function.
11. Intelligent recovery function. There is no need to reload the program after replacing the receiving card.
12. Never black screen. And intelligent power supply, in the event of a power failure, reduce the display brightness.
13. In line with EU RoHs standards.
14. Conforms to European CE-EMC standard.

Mooncell TB2000 LED Aviation Plug Transmitter Box Specifications:

1. Product Type: LED display transmitter box, sender box
2. Product Type: TB2000
3. Geared with Aviation plugs
4. Input Voltage: 100V-240V
5. Power Consumption: 15W
6. Box Size: 480MM x 248.8MM x 88MM
7. Application: full-color, single-color

Novastar MRV270-1 LED display small receiving card has the following features:

1. MOM can store calibration coefficient and the LED module information.

2. Single card supports resolution of 256x226 pixels.

Novastar MRV300(MRV300-1,MRV300Q)full color LED display receiving card is the standard model of Novastar receiving cards and also one of the most popular receivers for LED display solution all over the world. It is ideally a good choice for rental and staging LED display applications thanks to its phenomenal characteristics.

NOVA MRV300 Features:

1. Single card outputs 16-group of RGBR 'data;
2. Single card outputs 20-group of RGB data;
3. Single card outputs 64-group of serial data;
4. Single card support resolution 256x220;
5. Support configuration file readback;
6. Support program copy;
7. Support temperature monitoring.
8. Support Ethernet cable communication status detection;
9. Support power supply voltage detection;
10. Support pixel by pixel brightness and chromaticity calibration.
11. Brightness and chromaticity calibration coefficients for each LED;
12. Support pre-store picture setting;
13. Comply with EU RoHs standard;
14. Comply with EU CE-EMC standard;

Dbstar DBS-HRV11S LED wall receiving card has the following features:

1. Adpot the V-PWM3 proprietary technique
2. No need sending card,Support PC 1000M network card sending
3. Support grey disappearation,easy to make the shadow disppear from the dynamic screens
4 .Bran-new grey engine,better performance on low grey level
5. Support split connection, fully use 16groups data outputs ,raise refresh rate
6. Support play of 16bit HD video source
7. Power-on gradual protection.OE polarity switch control to protect screen scan tubes
8. Support brightness calibration(16bit),chromatic caliberation.
9. Support led drivers with PWM,highly improved refresh rate
10. Working voltage range:2.5-12V DC

Dbstar DBS-HRV09 full color LED receiver card has the following features:

1. Fully support HRV07,support programs change and order programs.
2. Support led drivers with PWM, highly improved refresh rates with static screens and dynamic screens.
3. Full new grey engine,better performance on low grey level.
4. Support automatic collection on error detection and other error information.
5. Support PC 1000M network card image sending,need no sending card.
6. Support 10bit HD video source.

Dbstar DBS-HVT09 (HVT 2009) sending card is a perfect choice for full color LED video wal due the the following features.

1. Supports RGB ,the maximum number or color supported is one billion;
2. Supports sound transmission;
3. Supports hot backup of dual LAN lines;
4. Supports input of DVI digital signal;
5. Rotation angles: 0 .90. 180. 270;
6. Supports encryption time by software setting;
7. Supports dual ports lateral, blank line and insert line setup;
8. Working voltage range: 100-240V AC 50/60HZ;
9. Single card can drive 1280*1024 ,1024*1200 or 2048*640 resolution;
10. Supports OE and PWM brightness adjustment, turn on/off, and can lock screen through the panel key.

Novastar MRV330Q RGB LED video Sign receiver card has the same function of NOVA MRV330. The NOVA MVR300Q receiving card is a 24 group data receiving card of Nova M3 series which is without separate HUB. It is specially designed for LED display factories with standardization for their modules.

NOVA MRV330Q Features:

1） Integrated 12 standard HUB75 connectors, without the HUB structure；
2） Single card outputs 24-group of RGB data;
3） Single card support resolution 256x220;
4） Supports configuration file readback;
5） Supports program copy;
6） Supports temperature monitoring;
7） Supports Ethernet cable communication status detection;
8） Supports power supply voltage detection;
9） Supports high gray scale and high refresh rate;
10） Supports pixel by pixel brightness and chromaticity calibration.
11） Brightness and chromaticity calibration coefficients for each LED;
12） Supports pre-store picture setting;
13） Complys with EU RoHs standard;
14） Complys with EU CE-EMC standard.

Novastar PBOX100 asynchronous LED control box geared with PSD100 card inside, which is ideally suited for mobile and rental purposes in different kinds of occasions. The Novastar PBXO100 has the following characteristics:

（1） Remote play-program publishing;
（2） Remote Monitoring;
（3） Remote power supply control;
（4） Play as per time segment or according to date, week and time;
（5） Display window auto-adapting;
（6） Multiple LED screens displaying synchronization;
（7） Support a variety of media formats, such as video, images, text, weather, clock, countdown, Flash(version 7 and above are not supported temporarily), Word, Excel, Txt etc;
（8） Support emergency insert play and immediate notification;
（9） Remote playback log managing;
（10） USB disc import and Plug-and-Play;
（11） Support remote upgrade of application software and firmware program;
（12） Flexible driving capacity：512x1024, 960x600, 1024x570, 1536x384, 2048x256 ;
（13） Full-scale drive IC support：TI, Toshiba, MBI, Siti, Sumacro, Mingyang, etc. Support DM13H, MBI5024/5036/5034, MBI5042/5041/5030, MBI5040, MBI5050, etc;
（14） Support full-color LED screens, static to 1/32 scan, real pixel/virtual pixel;
（15） Field frequency as 60Hz;
（16） The gray level is configurable, and support 16 bit 65536 level gray scale maximum;
（17） Refresh frequency：scanning screen can achieve 3840Hz and static screen can achieve 6000Hz;
（18） Support brightness calibration and color calibration;
（19） Support led open/short circuit detection of MBI5036, MBI5034, MBI5039, DM13H;
（20） On-board temperature and voltage detection;
（21） Support (with light sensor NS048C) automatic brightness adjustment；
（22） Support multi-function card MFN300；
（23） Support 3G，Wi-Fi or ADSL access mode.

Novastar PSD100 WiF has been out of production and no more in stock. Please buy Novastar T3 for replacement. Novastar PSD100-WiFi 3G is one of the most popular asynchronous controllers for full color LED display sign. NOVA PSD100 is widely accepted by clients on the world market thanks to its outstanding features as follows:

(1） Remote publish play-program;
（2） Remote Monitoring the current play information;
（3） Remote control power supply;
（4） Play as per time segment or according to date, week and time;
（5） Self-adapting window display;
（6） Multiple clients synchronous display;
（7） Supports a variety of media formats, such as video, images, text, weather, clock,countdown, Word, Excel, Txt etc;
（8） Supports emergency inser play,immediate notification;
（9） Remote manage the playback log;
（10） U disc export and Insert-and-Play;
（11） Supports remote upgrade of application software and hardware programs;
（12） Flexible loading capacity：512x1024, 800x600, 1024x512, 1536x384, 2048x256 ;
（13） Full-scale chip support：TI, Toshiba, MBlock, Siti, Sumacro, Mingyang and other series of products. Support DMI3H,MBI5024/5036/5034,
（14） MBI5042/5041/5030,MBI5040,MBI5050, etc;
（15） Supports full-color static to 32 scan, real pixel/virtual pixel;
（16） Field frequency as 60Hz;
（17） The gray level is settable, and support 16 bit 65536 level gray to the maximum;
（18） Refresh frequency：scanning screen can achieve 3840Hz and static screen can achieve 6000Hz;
（19） Supports brightness correction and chromaticity correction;
（20） Supports the open-short test of MBI5036, MBI5034, MBI5039, DM13H;
（21） Support all monitoring states of MON300 (monitoring working state,temperature, humidity, smoke, switching power supply voltage, fan speed and single lamp open short of each cabinet);
（22） On-board temperature and voltage test;
（23） Supports (with the optical probe NS048C) automatic brightness adjustment；
（24） Supports secondary development；
（25） Supports multi-function card MFN300;
(26) Support 3G, Wi-Fi or ADSL for its access mode.

Novastar PSD100 (NOVA PSD100) full color asynchronous LED control card is widely accepted by users on the world market thanks to its outstanding features as follows:

（1） Remote publish play-program；
（2） Remote Monitoring the current play information；
（3） Remote control power supply；
（4） Play as per time segment or according to date, week and time;
（5） Self-adapting window display；
（6） Multiple clients synchronous display；
（7） Support a variety of media formats, such as video, images, text, weather, clock,countdown, Word, Excel, Txt etc;
（8） Support emergency inser play,immediate notification；
（9） Remote manage the playback log；
（10） U disc export and Insert-and-Play;
（11） Support remote upgrade of application software and hardware programs;
（12） Flexible loading capacity：512x1024, 800x600, 1024x512, 1536x384, 2048x256 ;
（13） Full-scale chip support：TI, Toshiba, MBlock, Siti, Sumacro, Mingyang and other series of products. Support DMI3H,MBI5024/5036/5034,
（14） MBI5042/5041/5030,MBI5040,MBI5050, etc;
（15） Support full-color static to 32 scan, real pixel/virtual pixel;
（16） Field frequency as 60Hz;
（17） The gray level is settable, and support 16 bit 65536 level gray to the maximum;
（18） Refresh frequency：scanning screen can achieve 3840Hz and static screen can achieve 6000Hz;
（19） Support brightness correction and chromaticity correction;
（20） Support the open-short test of MBI5036, MBI5034, MBI5039, DM13H;
（21） Support all monitoring states of MON300 (monitoring working state,temperature, humidity, smoke, switching power supply voltage, fan speed and single lamp open short of each cabinet);
（22） On-board temperature and voltage test;
（23） Support (with the optical probe NS048C) automatic brightness adjustment；
（24） Support secondary development；
（25） Support multi-function card MFN300.

G-energy JPS300V (JPS300V5) 300W 110V 220V manual LED power supply is alse the replacement of N300V5-B.

Features:

- Ultra-thin: 30mm

- Working temperature: 30C~+60C

- Storage temperature: -40C~+80C

- Ultra-light and easy to install

- High efficiency: >81%

- Output voltage range: 4.9~5.1V

- Compliance: UL

- Input: 100-120Vac/200-240Vac/manual control

- Output: 5V 60A-300W

- Size: 217*117*30mm

Vdwall LVP605S LED display wall video processor is compatible with Novastar, Linsn, Colorlight, Mooncell, Dbstar sending cards, etc. Vdwall LVP605S is a perfect choice for applications such as large-scale stage and theatre, rental performance, high-end meeting, TV broadcast center, exhibition, etc.

If you place the order, we will ship the upgraded version---Vdwall LVP615S that is geared with WiFi module and no need to open the box when installing the sending cards.

Difference among the series:

Model Extended Model
605 Video
605D VGA / DVI / HDMI
605S SDI / HD-SDI / 3G-SDI

LVP605 Series Product Features:

10+ Bit Faroudja DCDI Cinema Processing
Faroudja TureLife(tm) Video Enhancer
New Faroudja Real Color
SDI / HD-SDI / 3G-SDI (1080P) Input
HDMI 1.3a with HDCP, HD 1080P input
Advanced 4x4 Pixels Interpolation Scaling Algorithm
Seamless Switching, Fade-in / Fade-out switching & Blend switching in random input signals
10-bit Processing
Hot Spare function, display will be stable and reliable
4 custom PIP / POP display modes, which can be switched by pressing one button
HD Text, Flash, Graphics & Logo Overlay
Picture Freeze function
2304 x 1152 or 2560 x 816 output for single machine
AIAO( Any In Any Out ) function allows for displaying any capturing picture in specific area on the screen
Setup and adjustment Easily through knob and keys on the panel. Full design RS232 command for operating and setting
Multi-machine in parallel, multi-unit installed in parallel drive indefinite LED lattice
Press keys or knob on frontal panel to directly select 10-channel input signal source,including:
1×DVI 3×CVBS 1×HDMI
1×YPbPr / YCbCr 2×VGA 1×S-Video
1×EXT.( extended modle , can be VIDEO or SD I / HD-SDI / 3G-SDI or VGA / DVI / HDMI )
2 LED Transmission Cards Built-in ability ( sending cards are optional )
2 channels can be configured to connect external stereo audio, plus HDMI,DVI and SDI audio, there are 5-channel audio for synchronous switch
24 / 7 Application

LVP615S Specifications:

Outputs:
VGA /DVI Format:

2560x816@60Hz
2304x1152@60Hz
2048×1152@60Hz
1440×900@60Hz
1366×768@60Hz
1920×1080@50Hz / 60Hz
1600×1200@60Hz
1280×1024@60Hz / 75Hz
1024×768@60Hz / 75Hz
Nums / Type: 1×VGA（RGBHV

Vdwall LVP605 HD LED Video Board Processor Features:

If you place the order, we will ship the upgraded version---Vdwall LVP615 that is geared with WiFi module and no need to open the box when installing the sending cards.

1. 10+ Bit Faroudja DCDI Cinema Processing
2. New Faroudja Real Color
3. Faroudja TureLife(tm) Video Enhancer
4. Advanced 4x4 Pixels Interpolation Scaling Algorithm
5. HDMI 1.3a with HDCP, HD 1080P input
6. SDI / HD-SDI / 3G-SDI (1080P) Input
7. 10-bit Processing
8. Seamless Switching, Fade-in / Fade-out switching & Blend switching in random input signals
9. HD Text, Flash, Graphics & Logo Overlay
10. 4 custom PIP / POP display modes, which can be switched by pressing one button
11. Hot Spare function, display will be stable and reliable
12. Picture Freeze function
13. AIAO( Any In Any Out ) function allows for displaying any capturing picture in specific area on the screen
14. 2304 x 1152 or 2560 x 816 output for single machine
15. Multi-machine in parallel, multi-unit installed in parallel drive indefinite LED lattice
16. Easy setup and adjustment through knob and keys on the panel. Full design RS232 command
for operating and setting
17. Press keys or knob on frontal panel to directly select 10-channel input signal source,including:
3×CVBS 1×DVI 1×HDMI
2×VGA 1×YPbPr / YCbCr 1×S-Video
1×EXT.( extended modle , can be VIDEO or SD I / HD-SDI / 3G-SDI or VGA / DVI / HDMI )
18. 2 channels can be configured to connect external stereo audio, plus DVI, HDMI and SDI audio,
there are 5-channel audio for synchronous switch
19. 2 LED Transmission Cards Built-in ability ( sending cards are optional )
20. 24 / 7 Application

Vdwall LVP615 LED Panel Wall WiFi Video Processor Features:

1. New generation Faroudja Real Color professional LED video processor ， 10+ Bit Faroudja DCDI Cinema Processing Faroudja TureLife(tm) videoenhancer.
2.SeamlessSwitching、FadeinFadeoutSwitching、Blend Switching
3.Twosignalswitching ways：one keyswitchandPre.+Takeswitch
4. 3 sets of custom dualpicture display mode, one key switch between modes. Any PIP/PBP display. AIAO(Any In Any Out) function, any interception andanyoutput.
5. Inputsignalhotsparefunctiontoensureoutputmorestable.
6. CustominputDVIEDIDtorealizeperfectpixeltopixeldisplay.
7.Custom output format. Single unit maximum output horizontal 3840 pixelsorvertical1920pixels.
8. DVI input port supports APPLE PC. DVI Loop unlimited cascade to realize sync. mosaic to drive indefinite LED lattice. Frame sync technology . No miss alignment or delay between two adjacent image outputs.
9.Avariety ofcontrolmethods：wirelessWIFI、 IP/LAN、 frontpanelbutton、 infraredremote control、PC software，Ipad、mobile phone terminaland etc..Flexibleoperation.
10.2 channels configurable external audio inputs. Plus HDMI、DP and SDI audiototal5channelsaudiosyncswitch.
11. Built in 2 pieces LED sending cards(compatible 4 RJ45 ports sending cards.Cardsareoptional.)
12. 24/7application，highreliabilityandstability

ECSUU​ LED-6698-CL Touch Screen Wireless LED Wall IPC Specifications:

1. Model: LED-6698-CL
2. Brand: ECSUU
3. 8.6 inch LCD touch screen
4. Dual displays, supports HD 1024*768
5. 1 gigabit network port, support WIFI, 3G/ 4G & other wireless networking
6. Wide temperature: -20 -+70℃
7. Small size, easy to install and carry
8. CE certified, convenient for export declaration

LED-6698-CL Specifications:

Novastar VX4S all-in-one is a professional LED display controller and processor. Besides the function of display control, it also features in powerful front end processing, so an external scalar is no longer needed. With professional interfaces integrated, VX4S with excellent image quality and flexible image control greatly meet the needs of the broadcast industry, Its friendly in user-interface. so that the display to work has never been as easier and more enjoyable as with VX4S.

Novastar VX4S Features:

1) The inputs of the VX4S include CVBS×2, VGA×2, DVI×1, HDMI×1, DP×1 and SDI×1. They support input resolution up to 1920×1200@60Hz; the input images of VX4S can be zoomed point-to-point according to the screen resolution;
2) Provide seamless high-speed switch and fade-in/ fade-out effect so as to strengthen and display picture demonstration of professional quality;
3) The location and size of PIP can both be adjusted, which can be controlled at will;
4) Adopts the Nova G4 engine; the screen is stable and flicker free without scanning lines; the images are exquisite and have a good sense of depth;
5) Can implement white balance calibration and color gamut mapping based on different features of LEDs used by screens to ensure reproduction of true colors;
6) HDMI/external audio input;
7) 10bit/8bit HD video source;
8) The loading capacity: 2.3 million pixels;
9) Support multiple controller montage for loading huge screen;
10) Supports Nova’s new-generation point-by-point correction technology; the correction is fast and efficient;
11) Computer software for system configuration is not necessary. The system can be configured using one knob and one button. All can be done just by fingers. That is what we called Touch Track!
12) Adopts an innovative architecture to implement smart configuration; the screen debugging can be completed within 30 seconds; greatly shorten the preparation time on the stage;
13) An intuitive LCD display interface and clear button light hint simplify the control of the system.

P2.5 indoor RGB LED video display board is equippedwith 160,000 pixels per sq.m and dark black SMD 2121 LEDs. It can produce extremely HD effects with the most pristine, excellent contrast ratio for its display colors at super close viewing distances. Pixel pitch 2.5mm is a high end digital display solution for indoor installations at trade shows, broadcast studios, museums, corporate venues, wedding events,etc. The best price above is based on one panel size of 640 x 640mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 16 working days. The panel size and color can be customized.

Features:

- Ultra high definition-160,000 pixels/sq.m;

- Top quality LED chips and driver IC;

- Rich colors and excellent contrast ratio;

- Superb color uniformity and large viewing angles;

- Low power consumption and long life span;

- Supports calibration technology on the LED lamps;

- Excellent heat dissipation on PCB board;

- IP43 protection rating to well withstand dust, moisture, static, etc;

- Brightness can be manually adjusted by software or auto-controlled by sensor card;

- Control systems supported: Linsn, Novastar, Colorlight, Mooncell, Huidu, Onbon, Xixun, etc.

Specifications:

1. Pixel Pitch: 2.5mm

2. Pixel Density: 160,000 pixels/sq.m

3. Pixel Configuration & LED Type: 1R1G1B, SMD2121

4. LED Display Module Size (L*H): 160*160mm

5. LED Display Module Resolution：64*64 pixels

6. LED Video Panel Size (L*H*D)：640*640*75mm

7. LED Video Screen Panel Resolution：256*256 pixels

8. LED Display Panel Material: Die casting aluminum

9. LED Display Panel Weight: 11.50KG/piece

10. Brightness：≥1,600 nits/sq.m

11. Brightness Control: 100 grades by software or auto sensor card

12. Driving Method：1/32 scan

13. Viewing Angle：140H /140V

14. Best Viewing Distance：>2.5M

15 Refresh Rate：≥800Hz

16. Grey Scale: ≥4,096 levels

17. Display Color: ≥16.7M

18. Power Consumption: max.:1050W/sq.m, avg.:420W/sq.m

19. Input Voltage：110~230V/AC (±10%)

20. Working Voltage: DC 5V

21. Input Power Frequency：50/60Hz

22. Protection Rating: IP43 (front/rear)

23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%

24. Storage Environment Temperature:-40-50C, Humidity: 10-90%

25. Life Span (50% brightness)：≥100,000 hours

26. Available Control System ：Linsn/NovaStar/Colorlight/Mooncell/Huidu/Onbon/Xixun/Lumen,etc

27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m

28. Operating System: Windows Series

29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc

30. Compliant Standard: CE/RoHS

P2.5 indoor RGB LED video display board is equippedwith 160,000 pixels per sq.m and dark black SMD 2121 LEDs. It can produce extremely HD effects with the most pristine, excellent contrast ratio for its display colors at super close viewing distances. Pixel pitch 2.5mm is a high end digital display solution for indoor installations at trade shows, broadcast studios, museums, corporate venues, wedding events,etc. The best price above is based on one panel size of 640 x 640mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 16 working days. The panel size and color can be customized.

Features:

- Ultra high definition-160,000 pixels/sq.m;

- Top quality LED chips and driver IC;

- Rich colors and excellent contrast ratio;

- Superb color uniformity and large viewing angles;

- Low power consumption and long life span;

- Supports calibration technology on the LED lamps;

- Excellent heat dissipation on PCB board;

- IP43 protection rating to well withstand dust, moisture, static, etc;

- Brightness can be manually adjusted by software or auto-controlled by sensor card;

- Control systems supported: Linsn, Novastar, Colorlight, Mooncell, Huidu, Onbon, Xixun, etc.

Specifications:

1. Pixel Pitch: 2.5mm

2. Pixel Density: 160,000 pixels/sq.m

3. Pixel Configuration & LED Type: 1R1G1B, SMD2121

4. LED Display Module Size (L*H): 160*160mm

5. LED Display Module Resolution：64*64 pixels

6. LED Video Panel Size (L*H*D)：640*640*75mm

7. LED Video Screen Panel Resolution：256*256 pixels

8. LED Display Panel Material: Die casting aluminum

9. LED Display Panel Weight: 11.50KG/piece

10. Brightness：≥1,600 nits/sq.m

11. Brightness Control: 100 grades by software or auto sensor card

12. Driving Method：1/32 scan

13. Viewing Angle：140H /140V

14. Best Viewing Distance：>2.5M

15 Refresh Rate：≥800Hz

16. Grey Scale: ≥4,096 levels

17. Display Color: ≥16.7M

18. Power Consumption: max.:1050W/sq.m, avg.:420W/sq.m

19. Input Voltage：110~230V/AC (±10%)

20. Working Voltage: DC 5V

21. Input Power Frequency：50/60Hz

22. Protection Rating: IP43 (front/rear)

23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%

24. Storage Environment Temperature:-40-50C, Humidity: 10-90%

25. Life Span (50% brightness)：≥100,000 hours

26. Available Control System ：Linsn/NovaStar/Colorlight/Mooncell/Huidu/Onbon/Xixun/Lumen,etc

27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m

28. Operating System: Windows Series

29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc

30. Compliant Standard: CE/RoHS

Novastar MCTRL300 full color LED sender box, NOVA MCTRL300 LED display controller has the same characteristics with sending card MSD300 and others as follows:

1） 1 DVI video input;

2） 1 audio input;

3） 2 Ethernet port output;

4） USB interface. Can be cascaded for uniform control;

5） Single sending card supports resolution of 1280×1024, 1024×1200, 1600×848, 1920×712 or 2048×668;

6） 1 light sensor interface;

7） Independent power supply;

8） 2 serial ports (UART OUTUART IN) for cascading by USB cable.

Novastar MCTRL300 full color LED sender box, NOVA MCTRL300 LED display controller has the same characteristics with sending card MSD300 and others as follows:

1） 1 DVI video input;

2） 1 audio input;

3） 2 Ethernet port output;

4） USB interface. Can be cascaded for uniform control;

5） Single sending card supports resolution of 1280×1024, 1024×1200, 1600×848, 1920×712 or 2048×668;

6） 1 light sensor interface;

7） Independent power supply;

8） 2 serial ports (UART OUTUART IN) for cascading by USB cable.

P1.904 Indoor HD LED video wall panel is equipped with 275,625 pixels per sq.m and dark black SMD1515 LEDs. It can produce extremely HD effects with the most pristine, excellent contrast ratio for its display colors at super close viewing distances. Pixel pitch 2.5mm is a high end digital display solution for indoor installations at trade shows, broadcast studios, museums, corporate venues, wedding events,etc. The best price above is based on one panel size of 480 x 480mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 16 working days. The panel size and color can be customized.

Features:

- Ultra high definition-275,625 pixels/sq.m;

- Top quality LED chips and driver IC;

- Rich colors and excellent contrast ratio;

- Superb color uniformity and large viewing angles;

- Low power consumption and long life span;

- Supports calibration technology on the LED lamps;

- Excellent heat dissipation on PCB board;

- IP43 protection rating to well withstand dust, moisture, static, etc;

- Brightness can be manually adjusted by software or auto-controlled by sensor card;

- Control systems supported: Linsn, Novastar, Colorlight, Mooncell, Huidu, Onbon, Xixun, etc.

Specifications:

1. Pixel Pitch: 1.904mm

2. Pixel Density: 275,625 pixels/sq.m

3. Pixel Configuration & LED Type: 1R1G1B, SMD1515

4. LED Panel Module Size: (L*H): 160*160mm

5. LED Panel Module Resolution: 84*84 pixels

6. LED Video Wall Panel Size: (L*H*D): 480*480*75mm

7. LED Video Wall Panel Resolution: 252*252 pixels

8. LED Video Wall Panel Material: Die casting aluminum

9. LED Video Wall Panel Weight: 6.5KG/piece

10. Brightness: ≥1,000 nits/sq.m

11. Brightness Control: 100 grades by software or auto sensor card

12. Driving Method: 1/28 scan

13. Viewing Angle: 140H /140V

14. Best Viewing Distance：>1.9M

15 Refresh Rate: ≥3,840Hz

16. Grey Scale: ≥4,096 levels

17. Display Color: ≥16.7M

18. Power Consumption: max.:800W/sq.m, avg.:320W/sq.m

19. Input Voltage: 110~230V/AC (±10%)

20. Working Voltage: DC 5V

21. Input Power Frequency：50/60Hz

22. Protection Rating: IP43 (front/rear)

23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%

24. Storage Environment Temperature:-40-50C, Humidity: 10-90%

25. Life Span (50% brightness): ≥100,000 hours

26. Available Control System : Linsn/NovaStar/Colorlight/Mooncell/Huidu/Onbon/Xixun/Lumen,etc

27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m

28. Operating System: Windows Series

29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc

30. Compliant Standard: CE/RoHS

P1.875 Indoor HD LED video wall panel is equipped with 284,442 pixels per sq.m and dark black SMD1515 LEDs. It can produce extremely HD effects with the most pristine, excellent contrast ratio for its display colors at super close viewing distances. Pixel pitch 2.5mm is a high end digital display solution for indoor installations at trade shows, broadcast studios, museums, corporate venues, wedding events,etc. The best price above is based on one panel size of 480 x 480mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 16 working days. The panel size and color can be customized.

Features:

- Ultra high definition-284,442 pixels/sq.m;

- Top quality LED chips and driver IC;

- Rich colors and excellent contrast ratio;

- Superb color uniformity and large viewing angles;

- Low power consumption and long life span;

- Supports calibration technology on the LED lamps;

- Excellent heat dissipation on PCB board;

- IP43 protection rating to well withstand dust, moisture, static, etc;

- Brightness can be manually adjusted by software or auto-controlled by sensor card;

- Control systems supported: Linsn, Novastar, Colorlight, Mooncell, Huidu, Onbon, Xixun, etc.

Specifications:

1. Pixel Pitch: 1.875mm

2. Pixel Density: 284,442 pixels/sq.m

3. Pixel Configuration & LED Type: 1R1G1B, SMD1515

4. LED Panel Module Size: (L*H): 240*120mm

5. LED Panel Module Resolution: 128*64 pixels

6. LED Video Wall Panel Size: (L*H*D): 480*480*75mm

7. LED Video Wall Panel Resolution: 256*256 pixels

8. LED Video Wall Panel Material: Die casting aluminum

9. LED Video Wall Panel Weight: 6.5KG/piece

10. Brightness: ≥1,000 nits/sq.m

11. Brightness Control: 100 grades by software or auto sensor card

12. Driving Method: 1/32 scan

13. Viewing Angle: 140H /140V

14. Best Viewing Distance: >1.8M

15 Refresh Rate: ≥3,840Hz

16. Grey Scale: ≥4,096 levels

17. Display Color: ≥16.7M

18. Power Consumption: max.:800W/sq.m, avg.:320W/sq.m

19. Input Voltage: 110~230V/AC (±10%)

20. Working Voltage: DC 5V

21. Input Power Frequency：50/60Hz

22. Protection Rating: IP43 (front/rear)

23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%

24. Storage Environment Temperature:-40-50C, Humidity: 10-90%

25. Life Span (50% brightness)：≥100,000 hours

26. Available Control System: Linsn/NovaStar/Colorlight/Mooncell/Huidu/Onbon/Xixun/Lumen,etc

27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m

28. Operating System: Windows Series

29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc

30. Compliant Standard: CE/RoHS

Novastar TB6 dual mode multimedia player is the second generation of NOVA multimedia players specifically created for small and medium size LED full color displays. Novastar TB6 out of the Taurus series products features the following advantages for better satisfying user's requirements:

- Synchronous or asynchronous control mode
- Powerful processing capability
- Omnidirectional control plan
- Dual-Wi-Fi mode
- Redundant backup

In addition to program publishing and screen control via PC, mobile phones and LAN,
the omnidirectional control plan also supports remote centralized publishing and
monitoring.

Novastar TB3 LED asynchronous multimedia player out is the second generation of multimedia player specifically developed for small and medium size LED full color displays. Novastar TB3 out of the Taurus series products features the following advantages for better satisfying user's requirements:

- Asynchronous playing mode
- Powerful processing capability
- Omnidirectional control plan
- Dual-Wi-Fi mode
- Redundant backup
- Loading capacity up to 650,000 pixels

In addition to program publishing and screen control via PC, mobile phones and LAN, the omnidirectional control plan also supports remote centralized publishing and monitoring.

Novastar T6 dual mode LED control card out of the Taurus series features the following advantages for better satisfying user's requirements:

- Synchronous or asynchronous control mode
- Powerful processing capability
- Omnidirectional control plan
- Dual-Wi-Fi mode
- Redundant backup

In addition to program publishing and screen control via PC, mobile phones and LAN,
the omnidirectional control plan also supports remote centralized publishing and
monitoring.

Novastar MCTRL R5 is an independent master controller developed by NovaStar
with an epoch-making significance. The loading capacity of a single unit
is up to 3840x1080@60Hz, which is able to meet the on-site
requirements of oversized LED displays. MCTRL R5 makes it easier to
create stunning rotation visual effects for users.

NOVA MCTRL R5 also can be used as two independent Full-HD controllers,
which makes it more flexible to load LED displays.
The design of MCTRL R5 is innovative. It allows to configure a display at
any time without PC.

Various video inputs such as HDMI, dual-link DVI,SDI etc. and outputs of
8-channel Neutrik Gigabit Ethernet ports as well as 2-channel optical
fiber ports are supported.

NOVA MCTRL R5 Features:

1) Complete video input interfaces: 6G SDI, HDMI1.4 x 1, dual-link DVI x
1;
2) Supports 8-channel Neutrik Gigabit Ethernet outputs and 2-channel
optical fiber outputs and maximum loading capacity of a single unit
up to 3840x1080@60Hz;
3) Image rotation can be realized at any area in the screen with any
angle. It will much eaiser with cabinet, ports and screen rotation
operation.
4) Innovative design to enable smart configuration which has greatly
shortened the time for stage preparation;
www.novastar.tech 2
5) NovaStar's G4 engine to create stable and flicker-free pictures without
scanning lines, and bring smooth images with a good sense of
layering;
6) Supports NovaStar's latest pixel-by-pixel calibration technology, the
process of which is fast and efficient;
7) Enables white balance calibration and color gamut mapping based on
the different features of LEDs on the display to ensure the real
restoration of color;
8) Screen configuration can be done at any time without PC;
9) Manual adjustment of screen brightness, which makes it much easier
and quicker;
10) Multiple controllers are able to be cascaded for uniform control.

NovaPro HD Novastar LED video wall controller has the following features:

1) The inputs of the NovaPro HD include CVBS, VGA, SDI, DVI, HDMI and DP. They support input resolution up to 1080p@60Hz. Highest pixel clock is 165MHz. Output bandwidth is up to 4GBit. Advanced de-interlacing motion adaptive processing technology is adopted so that images are clear and fine. And with HDMI, the gray scale depth can be up to 12bits.

2) Each input can be fully configured with contrast, brightness, hue, saturation, and RGB gain. Inputs can be scaled up or down to fit the LED display resolution.

3) Computer software for system configuration is not necessary. The system can be configured using one wheel and one button. All can be done just by fingers. That is what we called Touch Track! You can also configure the system with browsers. This gives you the option of using a remote PC (Windows or Mac or Linux), a pad or even a smart phone to do the configuration. Real-time previews assist with system set-up and confirm source status.

4) The NovaPro HD has DMX512 and GenLock interface. Professional control and synchronization are ready to go. Optical fiber outputs enable the confident long-distance data transmission.

5) The NovaPro HD is the flagship product of our new generation controllers, powerful in processing, professional in control, and friendly in user-interface. Having a display to work has never been as easier and more enjoyable as with NovaPro HD.

NovaPro HD Specifictions:

Outputs

DVI input looping out（DVILOOP）
1
Consistent with DVI input
Support HDCP looping out

DVI
2
1280×1024/60Hz 1440×900/60Hz
1680×1050/60Hz 1600×1200/60Hz
1600×1200/60Hz – Reduced
1920×1080/60Hz/50Hz 2560×816/60Hz
2048×640/60Hz 1920×1200/60Hz
2304×1152/60Hz 2048×1152/60Hz
1024×1280/60Hz 1536×1536/60Hz
User-defined output resolution (bandwidth optimization)
Horizontal resolution: maximum 3840 pixels
Vertical resolution: maximum 1920 pixels

HDMI
1
SDI input looping out （SDILOOP）
1
480i, 576i, 720p, 1080i/p（3G SDI）

Input power: 100～250VAC,50/60Hz，0.65A
Overall power consumption: 30W
Operating temperature: -20~60℃
Net Weight: 6Kg

Linsn TS802 full color LED display sign sending card is one of the most popular control systems for LED display application. Its LED Studio software (V9.6, 12.09, 12.43) is very easy to operate and it offers users a peace of mind for an absolutely stable performance 24/7. TS802/TS802D/SD802D model is compatible with all Linsn’s old cards such as TS701, TS801/TS801D (L202 ,1420D)/SD801D. One sending controller board can operate multi-displays, realizing displays combination, synchronous display, and independent playing. TS802 model include full-color sender card TS802 series and dual-color sender card DS802 series. Full-color sending card supports full-color, dual-color and single color led display sign. Dual-color sending card supports dual-color and single color led display sign.

LINSN TS802 Features:

1). 802 sending card max supports 2048*640

2). Supporting display mode: 640*480 800*600 1024*768 1280*768 1280*800 1280*1024 1440*900 1440*1080 1600*1200

1680*1050 1728*1296 1920*1080 1920*1200 2048*1152 2048*1280

3). Audio Transmission Function

802 sending card sends audio data using network cable, and Function board outputs audio signals to the display. Double 24bits

64KHZ hi-fi digital signal to analog signal or analog signal to digital signal, making display have the perfect video effect.

4). Cascade function

Through the dig switch on 802 sending card, several 802 sending cards can be easily cascaded to support a super large leddisplay

5). Sending card U/D port flexibility for carrying half width or half height

For example, TS801 can max support 1280*1024 with two ports

A single network output port supports 1280*512 or 640*1024

6). Sending card rotation function

In Sender setting, sending card has 0, 90, 180, 270 degree rotation function

7). Sending card zoom in/out function

In Sender setting, the ratio of width and height can be set to realize zoom in or zoom out

8). Supporting 10-bit colors

The seventh supports 8-bit colors: 256*256*256=16777216 kinds of colors.

The eighth supports 10-bit colors: 1024*1024*1024=1073741824 kinds of colors. It needs to work with our video processors using the 30 bits TTL.

9). Multi-display synchronous and combination functions.

P2.98mm indoor HD rental LED video display is primarily developed for rental and staging applications requiring unmatched video quality and super easy setup and tear down at different occassions. This P2.98mm pixel pitch is equipped with our private molding for its panel and the modules are magnetic that allows front and rear servicing. P2.98 LED display is getting more and more popular as a premium solution for live shows, news conference, exhibition, wedding and other important events. The best price above is based on one panel size of 500x 500mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 16 working days.

Features:

- Ultra high definition-112,560 pixels/sq.m;
- Die casting aluminum cabinet, seamless connnection;
- Light weight, easy setup and tear down;
- Rich colors and excellent contrast ratio;
- Superb color uniformity and large viewing angles;
- Magnetic module makes it much easier for serving;
- Available in both back and front maintenance;
- Optional LCD panel for cabinet backside design, customized company name and LOGO for easy advertising. Meanwhile, LCD module can display screen temperature, humidity,system voltage, cumulative operation time and starting time for easy supervision;
- Low power consumption and long life span;
- Supports calibration technology on the LED lamps;
- Excellent heat dissipation on PCB board;
- IP43 protection rating to well withstand dust, moisture, static, etc;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Control systems supported: Linsn, Novastar, Colorlight, Mooncell, etc.

Specifications:

1. Pixel Pitch: 2.98mm
2. Pixel Density: 112,560 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, SMD1515
4. LED Module Size (L*H): 250*250mm
5. LED Module Resolution: 84*84 pixels
6. LED Video Panel Size (L*H*D): 500*500*80mm
7. LED Video Panel Resolution: 168*168 pixels
8. LED Display Panel Material: Die casting aluminum
9. LED Display Panel Weight: 8KG
10. Brightness: ≥1,600 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: 1/14 scan
13. Viewing Angle: 140H /140V
14. Best Viewing Distance: >2.9M
15 Refresh Rate: ≥1,920Hz, up to 3840Hz-optional
16. Grey Scale: ≥4096 levels, up to 14 or 16 bit-optional
17. Display Color: ≥16.7M
18. Power Consumption: max.:1100W/sq.m, avg.:440W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP43 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn/NovaStar/Colorlight/Mooncell/Onbon/Xixun, etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

Geared with 65,536 pixels/sq.m and waterproof SMD LEDs, the ultimate P3.91 outdoor SMD rental LED screen system can generate crystal clear image details at very close viewing distance. Whether it is for outdoor or indoor events, these compact P3.91mm panels can absolutely meet your needs with high standard requirments. The best price above is based on one panel size of 500x 500mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 18 working days. The panel size and color can be customized.

Futures:

- Super high definition with 65,536 pixels/square meter;

- High brightness and wide viewing angle, >5,500nits/sqm & 140/140(H/V);
- Die casting aluminum material with seamless connection;
- Super light and thin, only 9KG and 80mm thickness;
- Easy to set up and tear down with fast locks;
- Great protection rating, IP65-front side & IP54-rear side;
- Exquisite design with screw holes enables convenient maintenance;
- Perfect for both indoor and outdoor rental applications.

Specifications:

1. Pixel Pitch: 3.91mm
2. Pixel Density: 65,536 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, SMD2525
4. LED Screen Module Size (L*H): 250*250mm
5. LED Screen Module Resolution: 64*64 pixels
6. LED System Panel Size (L*H*D): 500*500*80mm
7. LED System Panel Resolution: 128*128 pixels
8. LED Screen Panel Material: Die casting aluminum
9. LED Screen Panel Weight: 9KG
10. Brightness: ≥5,500 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: 1/13 scan
13. Viewing Angle: 140H /140V
14. Best Viewing Distance: >3.91M
15 Refresh Rate: ≥1,200Hz
16. Grey Scale: ≥8,192 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.:980W/sq.m, avg.:392W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP65/54 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn/NovaStar/Colorlight/Mooncell, etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

P3.91mm SMD indoor LED screen panel is specifically created for rental and staging applications requiring stunning image details at a very close viewing distance. These affordable HD panels are perfect suited for live shows, news conference, exhibition, wedding and other important events. The best price above is based on one panel size of 500x 500mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 16 working days.

Features:

- Ultra high definition-56,636 pixels/sq.m;
- Die casting aluminum cabinet, seamless connnection;

- Light weight, easy setup and tear down;
- Rich colors and excellent contrast ratio;
- Superb color uniformity and large viewing angles;
- Low power consumption and long life span;
- Supports calibration technology on the LED lamps;
- Excellent heat dissipation on PCB board;
- IP43 protection rating to well withstand dust, moisture, static, etc;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Control systems supported: Linsn, Novastar, Colorlight, Mooncell, etc.

Specifications:

1. Pixel Pitch: 3.91mm
2. Pixel Density: 56,636 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, SMD2121
4. LED Module Size (L*H): 250*250mm
5. LED Module Resolution: 64*64 pixels
6. LED Panel Size (L*H*D): 500*500*80mm
7. LED Screen Panel Resolution: 128*128 pixels
8. LED Panel Material: Die casting aluminum
9. LED Screen Panel Weight: 7KG
10. Brightness: ≥1,300 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: 1/16 scan
13. Viewing Angle: 140H /140V
14. Best Viewing Distance: >3.9M
15 Refresh Rate: ≥1200Hz
16. Grey Scale: ≥4096 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.:1100W/sq.m, avg.:440W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP43 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn/NovaStar/Colorlight/Mooncell/Onbon/Xixun, etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

Outdoor P10 SMD electronic LED display wall can create a huge impact with its view viewing angles and stunning image clarity even under bright daylight conditions for passers-by. P10 SMD LED display wall is highly stable, weather resistant and multi-functional. It is nowadays one of the most powerful tools to get the shortest return of investment in outdoor advertising campaignsis. It is a perfect choice for applications requiring close and medium range viewing distances. The best price above is based on one panel size of 960x 960mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 20 working days. The panel size and color can be customized.

Features:

- Easy installation and less maintenance;
- Stable performance and great heat dissipation;
- Low Power consumption and long life span;
- IP65/54 protection rating to perfectly work in all weather conditions;
- Synchronous control with PC or asynchronous mode without PC for small size screens;
- Brightness is adjustable manually or automatically against to light changing;
- All programs can be digitally edited and played in a loop automatically on the timetable;
- Compatible with all kinds of signal inputs via led video processor (VGA, HDMI, SDI, DVD, TV, etc);
- Can be controlled and monitored with camera at any time & anywhere via internet access;
- Online detecting and fault informing is optional with monitored card;
- Supports all windows operation systems XP,7/8,Vista,etc for its software.

Specifications:
1. Pixel Pitch: 10mm
2. Pixel Density: 10,000 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, SMD3535
4. LED Display Module Size (L*H): 320*160mm
5. LED Display Module Resolution: 32*16 pixels

6. LED Display Panel Size: 960*960*155mm
7. LED Display Panel Resolution: 96*96 pixels
8. LED Display Wall Panel Material: Cold rolled steel sheet
9. LED Display Wall Panel Weight: 60KG
10. Brightness: ≥7,500 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: 1/4 scan
13. Viewing Angle: 140H /140V
14. Best Viewing Distance: >6M
15 Refresh Rate: ≥800Hz
16. Grey Scale: ≥8,192 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.: 872W/sq.m, avg.: 348W/sq.m
19. Input Voltage: 110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP65/54 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn/NovaStar/Colorlight/Mooncell/Onbon/Xixun/Huidu,etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,DVI,DHMI,SDI,etc
30. Compliant Standard: CE/RoHS

P10 DIP Outdoor advertising LED screen is a perfect solution for applications requiring close to medium range viewing distances, P10 DIP LED screen is highly stable, weather resistant and multi-functional. It can create a huge impact with its stunning image clarity even under bright daylight conditions for passers-by. It is nowadays one of the most powerful tools to get the shortest return of investment in outdoor advertising campaigns. The best price above is based on one panel size of 960x 960mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 20 working days. The panel size and color can be customized.

Feature:

- Easy installation and less maintenance;
- Stable performance and great heat dissipation;
- Low Power consumption and long life span;
- IP65/54 protection rating to perfectly work in all weather conditions;
- Synchronous control with PC or asynchronous mode without PC for small size screens;
- Brightness is adjustable manually or automatically against to light changing;
- All programs can be digitally edited and played in a loop automatically on the timetable;
- Compatible with all kinds of signal inputs via led video processor (VGA, HDMI, SDI, DVD, TV, etc);
- Can be controlled and monitored with camera at any time & anywhere via internet access;
- Online detecting and fault informing is optional with monitored card;
- Supports all windows operation systems XP,7/8,Vista for its software.

Specifications:
1. Pixel Pitch: 10mm
2. Pixel Density: 10,000 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, DIP346
4. LED Screen Module Size (L*H): 160*160mm
5. LED Screen Module Resolution: 16*16 pixels
6. LED Screen Panel Size (L*H*D): 960*960*155mm
7. LED Screen Panel Resolution: 96*96 pixels
8. LED Screen Panel Material: Cold rolled steel sheet
9. LED Screen Panel Weight: 59KG
10. Brightness: ≥7,500 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: 1/4 scan
13. Viewing Angle: 110H /60V
14. Best Viewing Distance: >10M
15 Refresh Rate: ≥800Hz
16. Grey Scale: ≥8,192 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.:872W/sq.m, avg.:348W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP65/54 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn, NovaStar, Colorlight, Mooncell, Xxun,Huidu,Onbon, etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

P10 DIP Outdoor advertising LED screen is a perfect solution for applications requiring close to medium range viewing distances, P10 DIP LED screen is highly stable, weather resistant and multi-functional. It can create a huge impact with its stunning image clarity even under bright daylight conditions for passers-by. It is nowadays one of the most powerful tools to get the shortest return of investment in outdoor advertising campaigns. The best price above is based on one panel size of 960x 960mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 20 working days. The panel size and color can be customized.

Feature:

- Easy installation and less maintenance;
- Stable performance and great heat dissipation;
- Low Power consumption and long life span;
- IP65/54 protection rating to perfectly work in all weather conditions;
- Synchronous control with PC or asynchronous mode without PC for small size screens;
- Brightness is adjustable manually or automatically against to light changing;
- All programs can be digitally edited and played in a loop automatically on the timetable;
- Compatible with all kinds of signal inputs via led video processor (VGA, HDMI, SDI, DVD, TV, etc);
- Can be controlled and monitored with camera at any time & anywhere via internet access;
- Online detecting and fault informing is optional with monitored card;
- Supports all windows operation systems XP,7/8,Vista for its software.

Specifications:
1. Pixel Pitch: 10mm
2. Pixel Density: 10,000 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, DIP346
4. LED Screen Module Size (L*H): 160*160mm
5. LED Screen Module Resolution: 16*16 pixels
6. LED Screen Panel Size (L*H*D): 960*960*155mm
7. LED Screen Panel Resolution: 96*96 pixels
8. LED Screen Panel Material: Cold rolled steel sheet
9. LED Screen Panel Weight: 59KG
10. Brightness: ≥7,500 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: 1/4 scan
13. Viewing Angle: 110H /60V
14. Best Viewing Distance: >10M
15 Refresh Rate: ≥800Hz
16. Grey Scale: ≥8,192 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.:872W/sq.m, avg.:348W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP65/54 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn, NovaStar, Colorlight, Mooncell, Xxun,Huidu,Onbon, etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

P10mm SMD outdoor rental LED display signs adopts high quality waterproof SMD3535 LED lamps and has 100,000 pixels per square meter. It is a very affodable solution for both indoor and outdoor staging or rental applications requiring medium to long range viewing distances. The best price above is based on one panel size of 640 x 640mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 18 working days. The panel size and color can be customized.

Futures:

- Die casting aluminum material,seamless connection;
- Super light and thin, only 13.5KG and 80mm thickness;
- Easy to set up and tear down with fast locks;
- High brightness and wide viewing angle, >6,000nits/sqm & 140/140(H/V);
- Great protection rating, IP65-front side & IP54-rear side;
- Exquisite design with screw holes enables convenient maintenance;
- Perfect for both indoor and outdoor rental applications.

Specifications:

1. Pixel Pitch: 10mm
2. Pixel Density: 10,000 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, SMD3535
4. LED Display Module Size (L*H): 320*160mm
5. LED Display Module Resolution: 32*16 pixels
6. LED Display Panel Size (L*H*D): 640*640*80mm
7. LED Display Panel Resolution: 64*64 pixels
8. LED Display Signs Panel Material: Die casting aluminum
9. LED Display Signs Panel Weight: 13.5KG
10. Brightness: ≥6,000 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: 1/4 scan
13. Viewing Angle: 140H /140V
14. Best Viewing Distance: >10M
15 Refresh Rate: ≥800Hz
16. Grey Scale: ≥8,192 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.:980W/sq.m, avg.:392W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP65/54 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn/NovaStar/Colorlight/Mooncell, etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

P5mm indoor SMD full color LED display board can produce high image details with large viewing angles. It is widely placed at walking streets, shopping malls, railway stations, movie theatres, airports,etc. The best price above is based on one panel size of 640 x 640mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 16 working days. The panel size and color can be customized.

Features:

- Ultra high definition-40,000 pixels/sq.m;
- Top quality LED chips and driver IC;
- Aluminum aluminum cabinet, light weight;

- Geared with fast locks, easy installation;
- Rich colors and excellent contrast ratio;
- Superb color uniformity and large viewing angles;
- Low power consumption and long life span;
- Supports calibration technology on the LED lamps;
- Excellent heat dissipation on PCB board;
- IP43 protection rating to well withstand dust, moisture, static, etc;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Control systems supported: Linsn, Novastar, Colorlight, Huidu, Onbon, Xixun, Lumen, etc.

Specifications:

1. Pixel Pitch: 5mm
2. Pixel Density: 40,000 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, SMD3528
4. LED Display Module Size (L*H): 320*160mm
5. LED Display Module Resolution: 64*32 pixels
6. LED Display Panel Size (L*H*D): 640*640*75mm or as needed
7. LED Display Panel Resolution: 256*256*128 pixels
8. LED Display Board Panel Material: Aluminum alloy
9. LED Display Board Panel Weight: 11.50KG
10. Brightness: ≥1600 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: 1/16 scan
13. Viewing Angle: 140H /140V
14. Best Viewing Distance: >5M
15 Refresh Rate: ≥600Hz
16. Grey Scale: ≥4,096 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.:1050W/sq.m, avg.:420W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP43 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn/NovaStar/Colorlight/Mooncell/Onbon/Xixun/Lumen,etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

P5mm indoor SMD full color LED display board can produce high image details with large viewing angles. It is widely placed at walking streets, shopping malls, railway stations, movie theatres, airports,etc. The best price above is based on one panel size of 640 x 640mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 16 working days. The panel size and color can be customized.

Features:

- Ultra high definition-40,000 pixels/sq.m;
- Top quality LED chips and driver IC;
- Aluminum aluminum cabinet, light weight;

- Geared with fast locks, easy installation;
- Rich colors and excellent contrast ratio;
- Superb color uniformity and large viewing angles;
- Low power consumption and long life span;
- Supports calibration technology on the LED lamps;
- Excellent heat dissipation on PCB board;
- IP43 protection rating to well withstand dust, moisture, static, etc;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Control systems supported: Linsn, Novastar, Colorlight, Huidu, Onbon, Xixun, Lumen, etc.

Specifications:

1. Pixel Pitch: 5mm
2. Pixel Density: 40,000 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, SMD3528
4. LED Display Module Size (L*H): 320*160mm
5. LED Display Module Resolution: 64*32 pixels
6. LED Display Panel Size (L*H*D): 640*640*75mm or as needed
7. LED Display Panel Resolution: 256*256*128 pixels
8. LED Display Board Panel Material: Aluminum alloy
9. LED Display Board Panel Weight: 11.50KG
10. Brightness: ≥1600 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: 1/16 scan
13. Viewing Angle: 140H /140V
14. Best Viewing Distance: >5M
15 Refresh Rate: ≥600Hz
16. Grey Scale: ≥4,096 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.:1050W/sq.m, avg.:420W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP43 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn/NovaStar/Colorlight/Mooncell/Onbon/Xixun/Lumen,etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

P16 outdoor DIP RGB LED display billboard is popularly placed at skyscrapers, high ways, big plazas, airports requiring high brightness and contrast ratio even under direct sunlight at medium and long range viewing distances.The best price above is based on one panel size of 1024x1024mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 16 working days. The panel size and color can be customized.

Feature:

- Easy installation and less maintenance;
- Stable performance and great heat dissipation;
- Low Power consumption and long life span;
- IP65/54 protection rating to perfectly work in all weather conditions;
- Synchronous control with PC or asynchronous mode without PC for small size screens;
- Brightness is adjustable manually or automatically against to light changing;
- All programs can be digitally edited and played in a loop automatically on the timetable;
- Compatible with all kinds of signal inputs via led video processor (VGA, HDMI, SDI, DVD, TV, etc);
- Can be controlled and monitored with camera at any time & anywhere via internet access;
- Online detecting and fault informing is optional with monitored card;
- Supports all windows operation systems XP,7/8,Vista for its software.

Specifications:

1. Pixel Pitch: 16mm
2. Pixel Density: 3906 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, DIP546
4. LED Screen Module Size (L*H): 256*256mm
5. LED Screen Module Resolution: 16*16 pixels
6. LED Screen Panel Size (L*H*D): 1024*1024*155mm
7. LED Screen Panel Resolution: 64*64 pixels
8. LED Screen Panel Material:Cold rolled steel sheet
9. LED Screen Panel Weight: 68KG
10. Brightness: ≥7,500 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: Static
13. Viewing Angle: 110H /60V
14. Best Viewing Distance: >16M
15 Refresh Rate: ≥800Hz
16. Grey Scale: ≥8,192 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.:872W/sq.m, avg.:348W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP65/54 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn, NovaStar, Colorlight, Mooncell, Xxun,Huidu,Onbon, etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

P16 outdoor DIP RGB LED display billboard is popularly placed at skyscrapers, high ways, big plazas, airports requiring high brightness and contrast ratio even under direct sunlight at medium and long range viewing distances.The best price above is based on one panel size of 1024x1024mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 16 working days. The panel size and color can be customized.

Feature:

- Easy installation and less maintenance;
- Stable performance and great heat dissipation;
- Low Power consumption and long life span;
- IP65/54 protection rating to perfectly work in all weather conditions;
- Synchronous control with PC or asynchronous mode without PC for small size screens;
- Brightness is adjustable manually or automatically against to light changing;
- All programs can be digitally edited and played in a loop automatically on the timetable;
- Compatible with all kinds of signal inputs via led video processor (VGA, HDMI, SDI, DVD, TV, etc);
- Can be controlled and monitored with camera at any time & anywhere via internet access;
- Online detecting and fault informing is optional with monitored card;
- Supports all windows operation systems XP,7/8,Vista for its software.

Specifications:

1. Pixel Pitch: 16mm
2. Pixel Density: 3906 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, DIP546
4. LED Screen Module Size (L*H): 256*256mm
5. LED Screen Module Resolution: 16*16 pixels
6. LED Screen Panel Size (L*H*D): 1024*1024*155mm
7. LED Screen Panel Resolution: 64*64 pixels
8. LED Screen Panel Material:Cold rolled steel sheet
9. LED Screen Panel Weight: 68KG
10. Brightness: ≥7,500 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: Static
13. Viewing Angle: 110H /60V
14. Best Viewing Distance: >16M
15 Refresh Rate: ≥800Hz
16. Grey Scale: ≥8,192 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.:872W/sq.m, avg.:348W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP65/54 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn, NovaStar, Colorlight, Mooncell, Xxun,Huidu,Onbon, etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

P6mm Indoor SMD full color rental LED display cabinet is equipped with light die casting aluminum material and fast locking system enabling easy installation specially for hanging. P6mm is one of the most affordable solutoin for all kinds of indoor staging and rental applications requiring high video clarity at close to far viewing distances. The best price above is based on one panel size of 576 x 575mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 16 working days. The panel size and color can be customized.

Features:

- Ultra high definition-27,777 pixels/sq.m;
- Die casting aluminum cabinet, seamless connnection;

- Light weight, easy setup and tear down;;
- Rich colors and excellent contrast ratio;
- Superb color uniformity and large viewing angles;
- Low power consumption and long life span;
- Supports calibration technology on the LED lamps;
- Excellent heat dissipation on PCB board;
- IP43 protection rating to well withstand dust, moisture, static, etc;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Control systems supported: Linsn, Novastar, Colorlight, etc.

Specifications:

1. Pixel Pitch: 6mm
2. Pixel Density: 27,777 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, SMD3528
4. LED Display Module Size (L*H): 192*192mm
5. LED Display Module Resolution: 32*32 pixels
6. LED Display Cabinet Size (L*H*D): 576*576*75mm
7. LED Display Cabinet Resolution: 96*96 pixels
8. LED Display Cabinet Panel Material: Die casting aluminum
9. LED Display Cabinet Panel Weight: 10KG
10. Brightness: ≥1,600 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: 1/16 scan
13. Viewing Angle: 140H /140V
14. Best Viewing Distance: >6M
15 Refresh Rate: ≥800Hz
16. Grey Scale: ≥4096 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.:1050W/sq.m, avg.:420W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP43 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn/NovaStar/Colorlight/Mooncell/Onbon/Xixun/Lumen,etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

Geared with top quality waterproof SMD LED lamps, these rugged P5 SMD outdoor rental LED screen panels are specially developed for superior solution requiring extremely high resolution at closer viewing distance. It is widely used for rental, staging and mobile applications with various weather conditions. The best price above is based on one panel size of 640 x 640mm, EXW term. It is included with receiving card and necessary cables. The production time with aging test is 18 working days. The panel size and color can be customized.

Futures:

- High image details with 40000 pixels/square meter;
- Die casting aluminum material,seamless connection;
- Super light and thin, only 13.5KG and 80mm thickness;
- Easy to set up and tear down with fast locks;
- High brightness and wide viewing angle, >6,000nits/sqm & 140/140(H/V);
- Great protection rating, IP65-front side & IP54-rear side;
- Exquisite design with screw holes enables convenient maintenance;
- Perfect for both indoor and outdoor rental applications.

Specifications:

1. Pixel Pitch: 5mm
2. Pixel Density: 40,000 pixels/sq.m
3. Pixel Configuration / LED Type: 1R1G1B, SMD2828
4. LED Display Module Size (L*H): 320*160mm
5. LED Display Module Resolution: 64*32pixels
6. LED Display Panel Size (L*H*D): 640*640*80mm
7. LED Display Panel Resolution: 128*128 pixels
8. LED Display Signs Panel Material: Die casting aluminum
9. LED Display Signs Panel Weight: 13.5KG
10. Brightness: ≥6,000 nits/sq.m
11. Brightness Control: 100 grades by software or auto sensor card
12. Driving Method: 1/8 scan
13. Viewing Angle: 140H /140V
14. Best Viewing Distance: >10M
15 Refresh Rate: ≥960Hz
16. Grey Scale: ≥8,192 levels
17. Display Color: ≥16.7M
18. Power Consumption: max.:980W/sq.m, avg.:392W/sq.m
19. Input Voltage：110~230V/AC (±10%)
20. Working Voltage: DC 5V
21. Input Power Frequency: 50/60Hz
22. Protection Rating: IP65/54 (front/rear)
23. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
24. Storage Environment Temperature:-40-50C, Humidity: 10-90%
25. Life Span (50% brightness): ≥100,000 hours
26. Available Control System : Linsn/NovaStar/Colorlight/Mooncell, etc
27. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
28. Operating System: Windows Series
29. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
30. Compliant Standard: CE/RoHS

Colorlight (C&light) 5A-75 receiving card is a product that is specifically created for LED wall screen manufacturers with the standardization for the receiver card, which is free of hub board on its design.

C&light 5A-75 Features:

• Integrated HUB75, more convenient and lower cost.

• Superior display quality: high refresh rate, high color depth, and high brightness with the conventional chips.

• Supports all types of display module of the mainstream products (5A means any row, any column, any scan, any chips, and any shape).

• The use of more advanced algorithms, so that the receiving card to maximize the use of resources in order to improve display quality.

• Supports for high-precision pixel-by- pixel calibration in the Brightness and the chromaticity.

• Support for large area display.

• Professional design and strict testing to ensure high quality and reliable.

• Supports all conventional sending card of ColorLight, such as T7 sending card, Q7 HD Sender, Gigabit NIC, DMB, etc.

LED-500A is Magnimage's LED screen wall Mini video processor. It has numerous input and output plugs, including AV, DVI, VGA, HDMI, and it supports functions of image crop, image freeze, multi-template, zoom and so on。 LED-500A can install one popular send card such as LINSN, Novastar, Colorlight, Dbstar, etc.

LED-500A has been stopped producing and replaced by LED-500B.

Magnimage LED-500A Specifications:

Input:

AV x 1
VGA x 1
DVI x 1
HDMI x 1

Output：

DVI x 1
Resolution supported:
2048×1152/60Hz
2560×816/60Hz
1536×1536/60Hz

Magnimage LED-550DS is a perfect choice for television broadcasting center, stage, theater, conference, exhibition and other large LED display application occasions. The LED-550D series support oversized LED screen seamless splicing, through DVI loop interface; can realize nondestructive digital signal transmission, and support multi machine to cascade splicing and multiple switching effect(cut, fade, wipe).

LED-550D Series Features:

◆ Customized output resolution

◆ Save and load mode

◆ Seamless splicing

◆ Customized DVI input resolution

◆ Seamless switching,up to 20 switching effect

◆ Various test graphic cards

◆ Fade in/fade out

◆ Accurate brightness control

◆ Dual image

◆ Hot backup

◆ Dual channel image crop

◆ 7 inputs

◆ Test overlay

◆ Image enhancement

◆ Image frezze

◆ 1 expanded input(VGA or DVI or SDI)

◆ DVI loop

◆ Upper computer software control

◆ Image size,position any adjustme

◆ Support DP input

Specifications:

LED-550D
Inputs
AV x 2
VGA x 2
DVI x 1
HDMI x 1
DP x 1
Outputs
DVI loop out x 1
VGA x 1
DVI x 2

LED-550DS
Inputs
AV x 2
VGA x 2
DVI x 1
HDMI x 1
DP x 1
SDI x 1
Outputs
DVI loop out x 1
VGA x 1
DVI x 2
SDI loop out x 1

LED-550DD
Inputs
AV x 2
VGA x 2
DVI x 2 (1 inherent + 1 expanded)
HDMI x 1
DP x 1

Magnimage LED-550DS is a perfect choice for television broadcasting center, stage, theater, conference, exhibition and other large LED display application occasions. The LED-550D series support oversized LED screen seamless splicing, through DVI loop interface; can realize nondestructive digital signal transmission, and support multi machine to cascade splicing and multiple switching effect(cut, fade, wipe).

LED-550D Series Features:

◆ Customized output resolution

◆ Save and load mode

◆ Seamless splicing

◆ Customized DVI input resolution

◆ Seamless switching,up to 20 switching effect

◆ Various test graphic cards

◆ Fade in/fade out

◆ Accurate brightness control

◆ Dual image

◆ Hot backup

◆ Dual channel image crop

◆ 7 inputs

◆ Test overlay

◆ Image enhancement

◆ Image frezze

◆ 1 expanded input(VGA or DVI or SDI)

◆ DVI loop

◆ Upper computer software control

◆ Image size,position any adjustme

◆ Support DP input

Specifications:

LED-550D
Inputs
AV x 2
VGA x 2
DVI x 1
HDMI x 1
DP x 1
Outputs
DVI loop out x 1
VGA x 1
DVI x 2

LED-550DS
Inputs
AV x 2
VGA x 2
DVI x 1
HDMI x 1
DP x 1
SDI x 1
Outputs
DVI loop out x 1
VGA x 1
DVI x 2
SDI loop out x 1

LED-550DD
Inputs
AV x 2
VGA x 2
DVI x 2 (1 inherent + 1 expanded)
HDMI x 1
DP x 1

MCTRL4K is an independent LED display master controller developed by NovaStar with an epoch-making significance. The loading capacity of a single unit is up to 3840x2160@60Hz, which is able to meet the on-site requirements of oversized LED displays. MCTRL4K makes it easier to create stunning visual effects for users.

Novastar MCTRL4K Features:

1) Complete video input interfaces: DP1.2 x 1, HDMI2.0 x 1, dual-link DVI x 2;
2) Supports 16-channel Neutrik Gigabit Ethernet outputs and 4-channel optical fiber outputs and maximum loading capacity of a single unit up to 3840x2160@60Hz;
3) Supports two operating modes during dual-link DVI input: mosaic and multi-card;
4) Innovative design to enable smart configuration which has greatly shortened the time for stage preparation;
5) NovaStar's G4 engine to create stable and flicker-free pictures without scanning lines, and bring smooth images with a good sense of layering;
6) Supports NovaStar's latest pixel-by-pixel calibration technology, the process of which is fast and efficient;
7) Enables white balance calibration and color gamut mapping based on the different features of LEDs on the display to ensure the real restoration of color;
8) Screen configuration can be done at any time without PC;
9) Manual adjustment of screen brightness, which makes it much easier and quicker;
10) Multiple controllers are able to be cascaded for uniform control.

P5 indoor SMD LED screen wall modules are widely used as fixed installation at schools, shopping malls, casinos, airports, retail centers, clubs, etc. P5mm LED display module is currently a very popular solution for indoor fixed installation that requires clearer image details at a very close viewing distance. The best price above includes the 160mm x 160mm LED module size, 16pin signal and 5V power cables. The delivery time is around 2-5 days.

Features:
- Ultra high definition-40,000 pixels/sq.m;
- Top quality LED chips and driver IC;
- Low power consumption and long life span;
- Supports calibration technology on the LED lamps;
- Excellent heat dissipation on PCB board;
- Superb color uniformity and large viewing angles;
- IP43 protection rating to well withstand dust, moisture, static, etc;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Control systems supported: Linsn, Colorlight, Novastar, Dbstar, Mooncell,Onbon, Xixun, Huidu,Lumen, etc.

Specifications:
1. Pixel Pitch: 5mm
2. Pixel Density: 40,000 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD3528
4. LED Screen Wall Module Size (L*H): 160*160mm
5. LED Screen Wall Module Resolution：32*32 pixels
6. Brightness: ≥1,300 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/16 scan
9. Viewing Angle: 145H /145V
10. Best Viewing Distance: >5M
11 Refresh Rate: ≥800Hz
12. Grey Scale: ≥4096 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:980W/sq.m, avg.:392W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency：50/60Hz
18. Protection Rating: IP43 (front/rear)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Storage Environment Temperature:-40-50C, Humidity: 10-90%
21. Life Span (50% brightness): ≥100,000 hours
22. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun/Lumen,etc
23. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
24. Operating System: Windows Series
25. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
26. Compliant Standard: CE/RoHS

P3 indoor full color LED video sign module is equipped with 111,111 pixels per sq.m and dark black SMD 2121 LED lamps. These pixel pitch 3mm LED screen modules can deliver extremely clear image details with the most pristine, excellent contrast ratio for its display colors at super close viewing distances.It is a perfect choice for high end digital display solution for indoor installations at trade shows, broadcast studios, museums, corporate venues and other important events, and it is also ideally suited for rental and stage applications. The best price above includes the 192mm x192mm LED video sign module size, 16pin signal and 5V power cables.

Features:
- Ultra high definition-111,111 pixels/sq.m;
- Top quality LED chips and driver IC;
- Vivid colors and excellent contrast ratio;
- Superb color uniformity and large viewing angles;
- Supports calibration technology on the LED lamps;
- Low power consumption and long life span;
- IP43 protection rating to well withstand dust, moisture, static, etc;
- Excellent heat dissipation on PCB board;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Supports control systems: Linsn, Novastar, Colorlight,Mooncell, Huidu, Dbstar, Onbon, Xixun, Listen, etc.

Specifications:
1. Pixel Pitch: 3mm
2. Pixel Density: 111,111 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD2121
4. LED Video Sign Module Size (L*H): 192*192m
5. LED Video Sign Module Resolution：32*32 pixels
6. Brightness: ≥1,500 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/16 scan
9. Viewing Angle: 145H /145V
10. Best Viewing Distance: >3M
11 Refresh Rate: ≥800Hz
12. Grey Scale: ≥4096 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:980W/sq.m, avg.:392W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency：50/60Hz
18. Protection Rating: IP43 (front/rear)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Storage Environment Temperature:-40-50C, Humidity: 10-90%
21. Life Span (50% brightness): ≥100,000 hours
22. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun/Lumen,etc
23. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
24. Operating System: Windows Series
25. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
26. Compliant Standard: CE/RoHS

Equipped with 160,000 pixels per sq.m and dark black SMD 2121 LED lamps, P2.5 SMD indoor HD digital LED display module can deliver extremely clear image details with the most pristine, excellent contrast ratio for its display colors at super close viewing distances. P2.5mm full color black LED screen module is a perfect choice for high end digital display solution for indoor installations at trade shows, broadcast studios, museums, corporate venues and other important events, and it is also ideally suited for rental and stage applications. The best price above includes the 160mm x160mm LED video sign module size, 16pin signal and 5V power cables.

Features:
- Ultra high definition-160,000 pixels/sq.m;
- Top quality LED chips and driver IC;
- Vivid colors and excellent contrast ratio;
- Superb color uniformity and large viewing angles;
- Supports calibration technology on the LED lamps;
- Low power consumption and long life span;
- IP43 protection rating to well withstand dust, moisture, static, etc;
- Excellent heat dissipation on PCB board;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Supports control systems: Linsn, Novastar, Colorlight,Mooncell, Huidu, Dbstar, Onbon, Xixun, Listen, etc.

Specifications:
1. Pixel Pitch: 2.5mm
2. Pixel Density: 160,000 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD2121
4. LED Display Module Size (L*H): 160*160m
5. LED Display Module Resolution: 64*64 pixels
6. Brightness: ≥1,500 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/16 scan
9. Viewing Angle: 145H /145V
10. Best Viewing Distance: >2.5M
11 Refresh Rate: ≥800Hz
12. Grey Scale: ≥4096 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:980W/sq.m, avg.:392W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency：50/60Hz
18. Protection Rating: IP43 (front/rear)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Storage Environment Temperature:-40-50C, Humidity: 10-90%
21. Life Span (50% brightness): ≥100,000 hours
22. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun/Lumen,etc
23. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
24. Operating System: Windows Series
25. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
26. Compliant Standard: CE/RoHS

P10 indoor flexible LED display module made by our factory is ideall suited for all kinds of creative installations. The best price above includes the 320mm x 160mm LED module size, 16pin signal and 5V power cables. Wanranty period is 6 months. The delivery time is around 18 days.

Features:

- Geared with rubber faced, bendy, magnetic and silent design;

- Super flexible---flat, curved or circular shape can all be easily set up;

- Cost effective and excellent performance;

- Ultra thin and light, 15mm depth and 0.65kg per module;

- Less power consumption and superb heat dissipation;

- Easy Installation---magnetic design enables to attach on any mental sheet;

- The structure can be purchased along with the screen or sorted out locally;

- Multi-function---a small module in hand to meet your Do-it-Yourself demands.

Specifications:
1. Pixel Pitch: 10mm
2. Pixel Density: 10,000 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD3528
4. Soft LED Panel Size (L*H): 320*160mm
5. LED Panel Module Resolution：32*16 pixels
6. Brightness: ≥1,300 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/4 scan
9. Viewing Angle: 140H /140V
10. Best Viewing Distance：>10M
11 Refresh Rate: ≥1,000Hz
12. Grey Scale: ≥4096 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:680W/sq.m, avg.:272W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency：50/60Hz
18. Protection Rating: IP43 (front/rear)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Storage Environment Temperature:-40-50C, Humidity: 10-90%
21. Life Span (50% brightness): ≥100,000 hours
22. Control System Available: Linsn/NovaStar/Colorlight/Mooncell/Onbon/Xixun/Huidu/Lumen,etc
23. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
24. Operating System: Windows Series
25. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
26. Compliant Standard: CE/RoHS

P6.67 indoor soft LED video wall panel module geared with 22500 pixels can be perfectly installed at almost any indoor place for a flexible HD video display wall. The best price above includes the 320mm x 160mm LED module size, 16pin signal and 5V power cables. Wanranty period is 12 months. The delivery time is around 18 days.

Features:

- Geared with rubber faced, bendy, magnetic and silent design;

- Super flexible---flat, curved or circular shape can all be easily set up;

- Cost effective and excellent performance;

- Ultra thin and light, 15mm depth and 0.65kg per module;

- Less power consumption and superb heat dissipation;

- Easy Installation---magnetic design enables to attach on any mental sheet;

- The structure can be purchased along with the screen or sorted out locally;

- Multi-function---a small module in hand to meet your Do-it-Yourself demands.

Specifications:
1. Pixel Pitch: 6.67mm
2. Pixel Density: 22,500 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD3528
4. Soft LED Panel Size (L*H): 320*160mm
5. LED Panel Module Resolution：48*24 pixels
6. Brightness: ≥1,200 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/12 scan
9. Viewing Angle: 140H /140V
10. Best Viewing Distance：>6.6M
11 Refresh Rate: ≥1,000Hz
12. Grey Scale: ≥4096 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:680W/sq.m, avg.:272W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency：50/60Hz
18. Protection Rating: IP43 (front/rear)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Storage Environment Temperature:-40-50C, Humidity: 10-90%
21. Life Span (50% brightness): ≥100,000 hours
22. Control System Available: Linsn/NovaStar/Colorlight/Mooncell/Onbon/Xixun/Huidu/Lumen,etc
23. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
24. Operating System: Windows Series
25. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
26. Compliant Standard: CE/RoHS

P6 indoor SMD LED display board module is a very affordable solution for indoor fixed and mobile applications. These pixel pitch 6mm full color LED board modules are widely used at retail centers, clubs, schools, metro stations, etc. The best price above includes the 192mm x 192mm LED module size, 16pin signal and 5V power cables. Wanranty period is 6 months. The delivery time is around 2-5 days.

Features:
- High definition-27,778 pixels/sq.m;
- Top quality LED chips and driver IC;
- Low power consumption and long life span;
- Supports calibration technology on the LED lamps;
- Excellent heat dissipation on PCB board;
- Superb color uniformity and large viewing angles;
- IP43 protection rating to well withstand dust, moisture, static, etc;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Control systems supported: Linsn, Dbstar, Novastar, Colorlight, Onbon, Huidu, Xixun, Lumen, etc.

Specifications:
1. Pixel Pitch: 6mm
2. Pixel Density: 27,778 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD3528
4. LED Display Board Module Size (L*H): 192*192mm
5. LED Display Board Module Resolution：32*32 pixels
6. Brightness: ≥1,300 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/16 scan
9. Viewing Angle: 145H /145V
10. Best Viewing Distance：>3.6M
11 Refresh Rate: ≥800Hz
12. Grey Scale: ≥4096 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:900W/sq.m, avg.:360W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency：50/60Hz
18. Protection Rating: IP43 (front/rear)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Storage Environment Temperature:-40-50C, Humidity: 10-90%
21. Life Span (50% brightness): ≥100,000 hours
22. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun/Lumen,etc
23. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
24. Operating System: Windows Series
25. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
26. Compliant Standard: CE/RoHS

P4 indoor SMD black LED video screen module can create uniform, extreme image quality with accurately deep, rich color depth. These dark black P4mm SMD LED video wall display module with the most pristine display effects are primarily designed for superior installations at indoor places such as control rooms, broadcast studios, stages, news conferences, theaters, corporate venues, etc. The best price above includes the 256mm x 128mm LED module, 16pin signal and 5V power cables.

Features:
- Ultra high definition-62,500 pixels/sq.m;
- Top quality LED chips and driver IC;
- Vivid colors and excellent contrast ratio;
- Superb color uniformity and large viewing angles;
- Supports calibration technology on the LED lamps;
- Low power consumption and long life span;
- IP43 protection rating to well withstand dust, moisture, static, etc;
- Excellent heat dissipation on PCB board;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Supports control systems: Linsn, Novastar, Colorlight,Mooncell, Huidu, Dbstar, Onbon, Xixun, Listen, etc.

Specifications:
1. Pixel Pitch: 4mm
2. Pixel Density: 62,500 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD2121
4. LED Video Screen Module Size (L*H): 256*128mm
5. LED Video Screen Module Resolution：64*32 pixels
6. Brightness: ≥1,500 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/16 scan
9. Viewing Angle: 145H /145V
10. Best Viewing Distance: >4M
11 Refresh Rate: ≥800Hz
12. Grey Scale: ≥4096 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:980W/sq.m, avg.:392W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency：50/60Hz
18. Protection Rating: IP43 (front/rear)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Storage Environment Temperature:-40-50C, Humidity: 10-90%
21. Life Span (50% brightness): ≥100,000 hours
22. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun/Lumen,etc
23. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
24. Operating System: Windows Series
25. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
26. Compliant Standard: CE/RoHS

P10mm SMD outdoor LED display wall module can withstand all kinds of harsh environments thanks to its SMD3535 waterproof LED lamps in large viewing angles and high brightness of up to 6,500 nits per sqm. P10 full color SMD LED screen module is truly an ideal solution for both fixed and mobile applications in today's digital media and advertising campaigns. The best price includes the 320mm x 160mm SMD LED module, waterproof rubber, 16pin signal and 5V power cables.

Features:
- Big size LED chips and top quality driver IC;
- Supports calibration technology on the LED lamps;
- High brightness and excellent color uniformity;
- Great heat dissipation on PCB board;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Waterproof gluing is good to be used for more than 8 years;
- Low power consumption, Less maintenance and long life span;
- Control systems supported: Linsn, Novastar, Colorlight, Dbstar, Mooncell, Onbon, Xixun, Huidu, etc.

Specifications:
1. Pixel Pitch: 10mm
2. Pixel Density: 10,000 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD3535
4. LED Display Wall Module Size(L*H): 320*160mm
5. LED Display Wall Module Resolution: 32*16 pixels
6. Brightness: ≥6,500 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/4 scan
9. Viewing Angle: 140H /140V
10. Best Viewing Distance: >10M
10 Refresh Rate: ≥800Hz
12. Grey Scale: ≥8,192 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:890W/sq.m, avg.:356W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency: 50/60Hz
18. Protection Rating: front-IP65/rear-IP54(with cabinet)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Life Span (50% brightness): ≥100,000 hours
21. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun//Huidu/Lumen,etc
22. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
23. Operating System: Windows Series
24. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
25. Compliant Standard: CE/RoHS

P6 SMD outdoor RGB digital LED screen module produced by our factory can produce 27,777 pixels and 6,500 nits brightness per sq.m, and it is specifically created to work in all kinds of weather conditions. P6mm SMD outdoor full color LED display module is a very cost effective solution with high end technology for both indoor and outdoor applications requiring extreme image clarity at ultra close viewing distances. The best price includes the 192mm x 192mm SMD LED module, waterproof rubber, 16pin signal and 5V power cables.

Features:

- Super high resolution and large viewing angles;
- Big size LED chips and top quality driver ICs;
- Supports calibration technology on the LED lamps;
- High brightness and excellent color uniformity;
- Great heat dissipation on PCB board;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Waterproof gluing is good to be used for more than 8 years;
- Low power consumption, Less maintenance and long life span;
- Control systems supported: Linsn, Novastar, Colorlight, Dbstar, Mooncell, Onbon, Xixun, Huidu, etc.

Specifications:

1. Pixel Pitch: 6mm
2. Pixel Density: 27,777 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD3535
4. LED Digital Screen Module Size(L*H): 192*192mm
5. LED Digital Screen Module Wall Module Resolution: 32*32 pixels
6. Brightness: ≥6,500 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/8 scan
9. Viewing Angle: 140H /140V
10. Best Viewing Distance: >6M
10 Refresh Rate: ≥800Hz
12. Grey Scale: ≥8,192 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:890W/sq.m, avg.:356W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency: 50/60Hz
18. Protection Rating: front-IP65/rear-IP54(with cabinet)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Life Span (50% brightness): ≥100,000 hours
21. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun//Huidu/Lumen,etc
22. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
23. Operating System: Windows Series
24. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
25. Compliant Standard: CE/RoHS

P6 SMD outdoor RGB digital LED screen module produced by our factory can produce 27,777 pixels and 6,500 nits brightness per sq.m, and it is specifically created to work in all kinds of weather conditions. P6mm SMD outdoor full color LED display module is a very cost effective solution with high end technology for both indoor and outdoor applications requiring extreme image clarity at ultra close viewing distances. The best price includes the 192mm x 192mm SMD LED module, waterproof rubber, 16pin signal and 5V power cables.

Features:

- Super high resolution and large viewing angles;
- Big size LED chips and top quality driver ICs;
- Supports calibration technology on the LED lamps;
- High brightness and excellent color uniformity;
- Great heat dissipation on PCB board;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Waterproof gluing is good to be used for more than 8 years;
- Low power consumption, Less maintenance and long life span;
- Control systems supported: Linsn, Novastar, Colorlight, Dbstar, Mooncell, Onbon, Xixun, Huidu, etc.

Specifications:

1. Pixel Pitch: 6mm
2. Pixel Density: 27,777 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD3535
4. LED Digital Screen Module Size(L*H): 192*192mm
5. LED Digital Screen Module Wall Module Resolution: 32*32 pixels
6. Brightness: ≥6,500 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/8 scan
9. Viewing Angle: 140H /140V
10. Best Viewing Distance: >6M
10 Refresh Rate: ≥800Hz
12. Grey Scale: ≥8,192 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:890W/sq.m, avg.:356W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency: 50/60Hz
18. Protection Rating: front-IP65/rear-IP54(with cabinet)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Life Span (50% brightness): ≥100,000 hours
21. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun//Huidu/Lumen,etc
22. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
23. Operating System: Windows Series
24. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
25. Compliant Standard: CE/RoHS

P8 SMD RGB outdoor LED video sign module is ideally suited for both fixed and rental/mobile installations requiring stunning image clarity at ultra close distances,thanks to its SMD3535 waterproof LED lamps in large viewing angles and high brightness of up to 6,800 nits per sqm. P8 LED video sign module is one of the most cost effective solutions for today's outdoor SMD LED display applications. The best price above includes the 320mm x 160mm LED module, 16pin signal and 5V power cables. The delivery time is around 3-8 days.

Features:

- High brightness and wide viewing angles;
- Superb color uniformity and high contrast ratio;
- Big size LED chips and top quality driver ICs;
- Supports calibration technology on the LED lamps;
- Excellent heat dissipation on PCB board;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Waterproof gluing is good to be used for more than 8 years;
- Low power consumption, Less maintenance and long life span;
- Control systems supported: Linsn, Novastar, Colorlight, Dbstar, Mooncell,Onbon, Xixun, Huidu, etc;

Specifications:
1. Pixel Pitch: 8mm
2. Pixel Density: 15,625 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD3535
4. LED Screen Module Size(L*H): 320*160mm
5. LED Screen Module Resolution: 40*20 pixels
6. Brightness: ≥6,500 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/5 scan
9. Viewing Angle: 140H /140V
10. Best Viewing Distance: >8M
10 Refresh Rate: ≥800Hz
12. Grey Scale: ≥8,192 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:890W/sq.m, avg.:356W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency: 50/60Hz
18. Protection Rating: front-IP65/rear-IP54(with cabinet)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Life Span (50% brightness): ≥100,000 hours
21. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun//Huidu/Lumen,etc
22. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
23. Operating System: Windows Series
24. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
25. Compliant Standard: CE/RoHS

P6.67 SMD outdoor LED display billboard module made by CHINA LED PRO can generate super high resolution image quality with excellent contrast ratio and large viewing angle at a very close viewing distance. These high definition P6.67mm LED modules can guarantee a reliable performance 24/7 for advertisers with peace of mind. Those rugged, waterproof SMD LED modules are an high end solution in today's semi-outdoor/outdoor digital LED display applications. The best price includes the 320mm x 160mm SMD LED billboard module, waterproof rubber, 16pin signal and 5V power cables.

Features:
- High resolution and large viewing angles;
- Big size LED chips and top quality driver ICs;
- High brightness and excellent color uniformity;
- Supports calibration technology on the LED lamps;
- Excellent heat dissipation on PCB board;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Waterproof gluing is good to be used for more than 8 years;
- Low power consumption, Less maintenance and long life span;
- Control systems supported: Linsn, Novastar, Colorlight, Dbstar,Mooncell,Onbon, Xixun, Huidu, etc;

Specifications:
1. Pixel Pitch: 6.67mm
2. Pixel Density: 22,476 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD3535
4. LED Display Billboard Module Size(L*H): 320*160mm
5. LED Display Billboard Module Resolution: 48*24 pixels
6. Brightness: ≥6,500 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/6 scan
9. Viewing Angle: 140H /140V
10. Best Viewing Distance: >6.6M
10 Refresh Rate: ≥800Hz
12. Grey Scale: ≥8,192 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:890W/sq.m, avg.:356W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency: 50/60Hz
18. Protection Rating: front-IP65/rear-IP54(with cabinet)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Life Span (50% brightness): ≥100,000 hours
21. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun//Huidu/Lumen,etc
22. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
23. Operating System: Windows Series
24. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
25. Compliant Standard: CE/RoHS

P5 outdoor SMD full color LED video wall module is a perfect choice for both fixed and rental/mobile installations requiring stunning image clarity at ultra close viewing distances,thnaks to its SMD2727 waterproof LED lamps with large viewing angles and super high definition of 40,000 pixels per sqm. P5mm LED video display wall module is one of the most premium solutions for today's outdoor SMD LED display applications. The best price above includes the 320mm x 160mm LED module, 16pin signal and 5V power cables. The delivery time is around 3-8 days.

Features:
- Super high definition-40,000 pixels/sq.m;
- High brightness and wide viewing angles;
- Superb color uniformity and high contrast ratio;
- Big size LED chips and top quality driver ICs;
- Supports calibration technology on the LED lamps;
- Excellent heat dissipation on PCB board;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Waterproof gluing is good to be used for more than 8 years;
- Low power consumption, Less maintenance and long life span;
- Control systems supported: Linsn, Novastar, Colorlight, Dbstar, Mooncell,Onbon, Xixun, Huidu, etc;

Specifications:
1. Pixel Pitch: 5mm
2. Pixel Density: 40,000 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD2727
4. LED Video Wall Module Size(L*H): 320*160mm
5. LED Video Wall Module Resolution: 64*32 pixels
6. Brightness: ≥7,000 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/8 scan
9. Viewing Angle: 140H /140V
10. Best Viewing Distance: >5M
10 Refresh Rate: ≥800Hz
12. Grey Scale: ≥8,192 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:890W/sq.m, avg.:356W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency: 50/60Hz
18. Protection Rating: front-IP65/rear-IP54(with cabinet)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Life Span (50% brightness): ≥100,000 hours
21. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun//Huidu/Lumen,etc
22. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
23. Operating System: Windows Series
24. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
25. Compliant Standard: CE/RoHS

The ultimate P4mm HD outdoor SMD LED video board module can create extremely clear image details at ultra close viewing distances,thnaks to its SMD waterproof LED lamps with large viewing angles and super super high definition of 62,500 pixels per sqm. P4 LED video display board module is one of the most premium solutions for today's outdoor SMD LED display applications. The best price above includes the 256mm x 128mm LED module, 16pin signal and 5V power cables. The delivery time is around 3-8 days.

Features:
- Super high definition-62,500 pixels/sq.m;
- High brightness and wide viewing angles;
- Superb color uniformity and high contrast ratio;
- Big size LED chips and top quality driver ICs;
- Supports calibration technology on the LED lamps;
- Excellent heat dissipation on PCB board;
- Brightness can be manually adjusted by software or auto-controlled by sensor card;
- Waterproof gluing is good to be used for more than 8 years;
- Low power consumption, Less maintenance and long life span;
- Control systems supported: Linsn, Novastar, Colorlight, Dbstar, Mooncell,Onbon, Xixun, Huidu, etc;

Specifications:
1. Pixel Pitch: 4mm
2. Pixel Density: 62,500 pixels/sq.m
3. Pixel Configuration & LED Type: 1R1G1B, SMD2727
4. LED Video Borad Module Size(L*H): 256*128mm
5. LED Video Board Module Resolution: 64*32 pixels
6. Brightness: ≥6,300 nits/sq.m
7. Brightness Control: 100 grades by software or auto sensor card
8. Driving Method: 1/8 scan
9. Viewing Angle: 140H /140V
10. Best Viewing Distance: >4M
10 Refresh Rate: ≥800Hz
12. Grey Scale: ≥8,192 levels
13. Display Color: ≥16.7M
14. Power Consumption: max.:890W/sq.m, avg.:356W/sq.m
15. Input Voltage: 110~230V/AC (±10%)
16. Working Voltage: DC 5V
17. Input Power Frequency: 50/60Hz
18. Protection Rating: front-IP65/rear-IP54(with cabinet)
19. Operating Environment Temperature: -20C~+50C, Humidity: 10%~95%
20. Life Span (50% brightness): ≥100,000 hours
21. Control System Available: Linsn/NovaStar/Dbstar/Colorlight/Mooncell/Onbon/Xixun//Huidu/Lumen,etc
22. Transmission Distance: multi-mode fiber <500m, single mode fiber <30Km, internet cable <100m
23. Operating System: Windows Series
24. Video Input (with video processor): VGA,YC,DVI,DHMI,SDI,RGB,CVBS,GD-SDI,etc
25. Compliant Standard: CE/RoHS