Linsn TS802 full color LED display sign sending card is one of the most popular control systems for LED display application. Its LED Studio software (V9.6, 12.09, 12.43) is very easy to operate and it offers users a peace of mind for an absolutely stable performance 24/7. TS802/TS802D/SD802D model is compatible with all Linsn’s old cards such as TS701, TS801/TS801D (L202 ,1420D)/SD801D. One sending controller board can operate multi-displays, realizing displays combination, synchronous display, and independent playing. TS802 model include full-color sender card TS802 series and dual-color sender card DS802 series. Full-color sending card supports full-color, dual-color and single color led display sign. Dual-color sending card supports dual-color and single color led display sign.

LINSN TS802 Features:

1). 802 sending card max supports 2048*640

2). Supporting display mode: 640*480 800*600 1024*768 1280*768 1280*800 1280*1024 1440*900 1440*1080 1600*1200

1680*1050 1728*1296 1920*1080 1920*1200 2048*1152 2048*1280

3). Audio Transmission Function

802 sending card sends audio data using network cable, and Function board outputs audio signals to the display. Double 24bits

64KHZ hi-fi digital signal to analog signal or analog signal to digital signal, making display have the perfect video effect.

4). Cascade function

Through the dig switch on 802 sending card, several 802 sending cards can be easily cascaded to support a super large leddisplay

5). Sending card U/D port flexibility for carrying half width or half height

For example, TS801 can max support 1280*1024 with two ports

A single network output port supports 1280*512 or 640*1024

6). Sending card rotation function

In Sender setting, sending card has 0, 90, 180, 270 degree rotation function

7). Sending card zoom in/out function

In Sender setting, the ratio of width and height can be set to realize zoom in or zoom out

8). Supporting 10-bit colors

The seventh supports 8-bit colors: 256*256*256=16777216 kinds of colors.

The eighth supports 10-bit colors: 1024*1024*1024=1073741824 kinds of colors. It needs to work with our video processors using the 30 bits TTL.

9). Multi-display synchronous and combination functions.

Linsn TS901 sending card, SD901 LED sender can not work on cascading. TS901 has the following features:

1.901 sending card including: TS901(SD901) full color and DS901 double color
2.Full color sending card supports full color, double color and single color led screen
3.Double color sending card supports double color and single color led screen
4.901 sending card max support 2048*640, and support customized resolution
5.Support configuration file (.RCG) broadcasting function
6.Replacing receiving card without resending .RCG file
7.Support display connection file (.CON) broadcasting function
8.Replacing receiving card without resending .CON file
9.Support HDMI input, support HDMI format HD video input (such as from DVD player)
10.Support zoom in/out
11.Can put whole computer LCD monitor content on LED screen with zoom in/out function

Equipped with HUB75 ports, Linsn RV908T full color receiver card is primarily designed for LED video wall manufacturers with standardizing products, which can save some costs on the HUB boards. RV908T has the same size and function of RV801 series besides its new characteristics. The difference between RV908T and RV908H is that RV908T is without LCD, smoke, humidity, door and fan detecting interfaces.

Linsn RV908T Features:

1. Geared with 12 HUB75 of 16P interfaces on board, no need for extra HUB card;

2. Supports 12-bit color HDMI input ( TS901 sending card required );

3. With 18 signal processors, up to 18 each of red, green and blue (260 000) gray;

4. Single card can maximum-support 1024X256 pixels;

5. CE-EMC compliance with EU standards.

Linsn EB701 LED display sending HUB splitter is specially created for multi-screens and super large LED screens.The card possesses two input ports and eight output ports,enabling one to split to eight and two to split to four. Functions can change automatically. It can used as one spliting to eight. It supports multiple cards cascading, with the maxixum number of eight cards cascading, enabling one to split to sixty four.

Linsn EB701 Functions:

When many receiving cards of one large LED display are connected together, the EB701 splitter has the following functions:
1. To minimize signal delay and signal lost problem caused by failure on receiving cards or cables;
2. Easy to locate the cabinets with malfunction;
3. Keep most of the LED display working while maintenancing the cabinets with malfunction.

Each additional Linsn CN701 LED controller card relaying box from sending card to receiving card can increase the distance of about 170 meters.This relaying box can only be used for Linsn LED control cards.

Connector: RJ45

Linsn RV905H and RV925H mini receiver card are specifically designed for rental LED screen panels. RV905H and 925H are equipped with the following features:

1. Compatible with RV801, has all the features of RV801
2. Small size (479mm X 1365mm), mounting holes are same with RV802
3. Two output interfaces can directly drive module (save hub card)
4. Each of the 2 interfaces has up to 14 groups parallel-data; total 28 groups of parallel data interface to achieve higher refresh rate
5. Each interface has VCC pin to supply power for control system from led module. No need to get extra power supply for control system.
6. support 12-bit HDMI colors input (required the 9th generation sending card)
7. using18-bit signal processor, maximum support 18-bit (260,000) gray (each of red, green and blue)
8. Single card maximum supports 1024X256 pixels, and 1024 grades single pixel chromaticity correction
9. Supports single-card color space conversion
10. Temperature monitoring
11. Humidity monitoring (humidity sensor sold separately)
12. In line with EU RoHS standards
13. In line with EU standards CE-EMC

Linsn small size receiving cards RV907H,927H,937H are specifically designed for rental LED Wall. These cards are not only compatible with generation RV807,817,827,837 completely, but can also meet the needs of LED lighting and LED curtain. RV907H,927H and 937H have the following features:

1. Compatible with RV801, has all the features of RV801
2. Small size (479mm X 1365mm), mounting holes are same with RV802
3. Four output interfaces can directly drive module (save hub card)
4. Each of the 4 interfaces has up to 6 groups parallel-data; total 24 groups of parallel data interface to achieve higher refresh rate
5. Provide a 90 degree 26-Pin interface, convenient PCB docking design
6. Provide 16 groups serial-data for led lighting and led curtain
7. Each interface has VCC pin to get power supply for control system from led module. No need to get extra power supply for control system.
8. support 12-bit HDMI colors input (required the 9th generation sending card)
9. using18-bit signal processor, maximum support 18-bit (260,000) gray (each of red, green and blue)
10. Single card maximum supports 1024X256 pixels, and 1024 grades single pixel chromaticity correction
11. Supports single-card color space conversion
12. Support program replication
13. Supports pixel fault detection (requires a dedicated chip support)
14. Support network cable BER test
15. Support flat cable fault detection
16. Support the cabinet-door monitoring (open/close)
17. Two lines fan-speed monitoring
18. Three lines Voltage monitoring: one for the system, two for cabinet power
19. Temperature monitoring
20. Humidity monitoring (humidity sensor sold separately)
21. Smoke monitoring (smoke module sold separately)
22. In line with EU standards CE-EMC

Linsn RV902H (RV952H) LED board Mini recieving card is upgraded from the 8th generation system RV802/RV806. RV902H is specifically designed for led lighting decoration and led curtain, which require small size for easy installation. Compared with RV901H, RV902H is of small size and with different output interfaces. RV902H has all other functions of RV802/806, Besides, RV902H is added with the following features:

1. Support 12-bit HDMI colors input (required the 9th generation sending card)
2. Single card maximum supports 1024X256 pixels, and 1024 grades single pixel chromaticity correction
3. Using18-bit signal processor, maximum support 18-bit (260,000) gray (each of red, green and blue)
4. Supports single-card color space conversion
5. Supports hot backup with dual receiver cards for demanding performances screen
6. Support program replication
7. Support configuration file readback
8. Supports pixel fault detection (requires a dedicated chip support)
9. Support network cable BER test
10. Support flat cable fault detection
11. Temperature monitoring
12. Support the cabinet-door monitoring (open/close)
13. Humidity monitoring (humidity sensor sold separately)
14. Three lines Voltage monitoring: one for the system, two for cabinet power
15. Two lines fan-speed monitoring
16. Smoke monitoring (smoke module sold separately)
17. In line with EU standards CE-EMC

Linsn RV908M receiving card is RV801 or RV901 plus HUB75 board, It is designed for HD LED video wall modules with 1/32 scan. It is a perfect choice for manufacturers with standardization---free of hub card design. It has all the function of RV801 and RV901. RV908M has added with the following features:

1. Onboard the 12 16-Pin interface of HUB75 the, no extra hub needed;
2. Single card maximum supports 1024X256 pixels, and 1024 grades single pixel chromaticity correction;
3. Support program replication;
4. Using18-bit signal processor, maximum support 18-bit (260,000) gray (each of red, green and blue);
5. Support the cabinet-door monitoring (open/close);
6. Support 12-bit HDMI colors input (required the 9th generation sending card);
7. Three lines Voltage monitoring: one for the system, two for cabinet power;
8. Supports pixel fault detection (requires a dedicated chip support);
9. Support flat cable fault detection;
10. Two lines fan-speed monitoring;
11. Supports hot backup with dual receiver cards for demanding performances screen;
12. Support network cable BER test;
13. Supports single-card color space conversion;
14. Smoke monitoring (smoke module sold separately), Temperature monitoring, Humidity monitoring (humidity sensor sold separately);
15. Pass EU standards: CE-EMC.

SC801 single mode LED display optical fiber converter is popular used for LINSN receiving cards and others.

The best price above includes both sending and receiving devices-----input voltage--110V～230V----highly recommended.(It is USD100 for two pieces----input voltage---DC5V. It is not easy to replace the power adopter in your local market if it is broken.)

Transmission Distance: 20KM
Size: 14.0CM×8.7CM(with fixed bracket: 11.4CM×2.8CM),diameter of positioning hole is 0.35CM

Power Supply: 110V～230V，50Hz/60Hz

Data Interface: RJ45 network cable;SC mode optical connector

Wave Length: 1310nm

Optical Power: -6db～－8db

Linsn EX901(EX901D) LED screen multi-function control card is geared with temperature and humidity acquisition, switching power of the big-screen and voice transmission capabilities. It can regulate the adjustment of brightness.

Linsn EX901 Features:

1. Integrated audio signal transmission, no external audio amplifier line, direct access function card;

2. 256 grade automatic brightness adjustment;

3. Monitoring the led screen's temperature and humidity in Real-time;

4. Displaying the current temperature and humidity on the led screen;

5. Smoke detection,(need to install the smoke probe);

6. Power On/Off the power of the led screen remotely;

7. Controlling the led screen's fan and air-conditioning switcher automatically through the temperature.

Linsn TS852 RGB LED display sender box is geared with TS802 sending card inside. Linsn TS852 is the replaced product of TS851-out of production.

Linsn TS852 Features:

1). TS852 sender box maximum supports 2048*640

2). Supporting display mode: 640*480 800*600 1024*768 1280*768 1280*800 1280*1024 1440*900 1440*1080 1600*1200

1680*1050 1728*1296 1920*1080 1920*1200 2048*1152 2048*1280

3). Audio Transmission Function

TS852 sending box sends audio data using network cable, and Function board outputs audio signals to the display. Double 24bits

64KHZ hi-fi digital signal to analog signal or analog signal to digital signal, making display have the perfect video effect.

4). Cascade function

Through the dig switch on 802 sending card, several 802 sending cards can be easily cascaded to support a super large leddisplay

5). Sending card U/D port flexibility for carrying half width or half height

For example, TS801 can max support 1280*1024 with two ports

A single network output port supports 1280*512 or 640*1024

6). Sending card rotation function

In Sender setting, sending card has 0, 90, 180, 270 degree rotation function

7). Sending card zoom in/out function

In Sender setting, the ratio of width and height can be set to realize zoom in or zoom out

8). Supporting 10-bit colors

The seventh supports 8-bit colors: 256*256*256=16777216 kinds of colors.

The eighth supports 10-bit colors: 1024*1024*1024=1073741824 kinds of colors. It needs to work with our video processors using the 30 bits TTL.

9). Multi-display synchronous and combination functions.

Linsn RV901T RGB LED display board receiving card can work with all its old receiving cards such as LXY801/RV801/RV801D/RV801-D/RV801F/RV901/RV901H (for RV801 series, it is 100% compatible, please just try it). The difference between RV901H and RV901T is that RV90T is without LCD, smoke, humidity, door and fan detecting interfaces.

LINSN RV901T Features:

1. Supports 12-bit color HDMI input (on behalf of the sending card with nine);

2. With 18 signal processors, up to 18 each of red, green and blue (260 000) gray;

3. Single card maximum supports 1024 X 256 pixels;

4. CE-EMC compliance with EU standards.

Linsn EX902D LED wall multifunction controller is used together with sending card and receiving cards with followings functions:

1. Integrated audio signal transmission, no need additional audio cable, can directly access the functional card toamplifier;
2. 256 automatic brightness adjustment;
3. Real-time monitoring screen in temperature and humidity;
4. Display the current temperature, humidity in LED screens;
5. Smoke detection when install smoke probe;
6. Remote Switch big screen power;
7. Automatic sensor temperature and self-control fan and air-conditioning switch.